please delete Options

[pxcr440]

ok so i had alot of codes and cars a/f is way off and while checkign the plugs and harness to make sure the senors were getting ground and power which they are , but while the car was running i decided for some reason to unplug the center 16 pin harness , thats coolant temp, aft , air intake temp , throttle position and oxygen sensor and knock i believe , much to my surprise the car still ran , with very little to no effect , so does that narrow my problem down to the ecu as the culprit , if so i need a new jdm ecu for my 2nd gen

This post has been edited by pxcr440: Jun 30, 2010 - 1:41 PM