 hybrid suspension, ST202/ST205 |
 Sep 18, 2010 - 7:15 PM
|
 
|
 Enthusiast  Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%)  |
Ok,
So I've looked around a bit and I'm not really sure of my thoughts on this. We know that you can use ST202 front suspension while running a 3sgte motor. But I'm switching to AWD...which means ST205 rear end components. I'm going to measure the bolt spacing on the ST202 rear knuckles vs the ST205 rear knuckles that I have to see if that physically measures up. But what I want to know is if the REAR struts on a ST202 and an ST205 are pretty much the same. I know spring rates are higher for an ST205. Could I run a full ST202 TEIN SS coilover setup and be ok AWD or will I need the ST205 rear coilover? not sure if they are the same lengths or not? |
Posts in this topic
playr158 hybrid suspension Sep 18, 2010 - 7:15 PM
Rusty the ST205 rear struts should be different to the S... Sep 19, 2010 - 1:22 AM azian_advanced The ST205 bolt spacing is different from the ST202... Sep 19, 2010 - 9:39 AM
playr158 So if its just the bolt spacing/bracket width it i... Sep 19, 2010 - 10:59 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: May 28th, 2025 - 11:42 PM |