 Rota G-Force Wheels, Curious about Fitment |
 May 12, 2011 - 11:35 AM
|
 
|
|
Enthusiast  Joined May 16, '10 From Raleigh Currently Offline Reputation: 12 (100%)  |
I'm looking at a set of Rota G-force wheels in a 17x8/ 5x100/ +48mm offset. I'm looking for a fairly flush look. So if I've done my research right that would mean that I would need an 8mm spacer (or as close as i could get to this) to bring the wheels to the ideal flush location. Just looking for some clarification. I'm really looking for a wheel that has some concavity to it. I don't want a wheel that is flat faced. Please let me know if i've done the math properly here, or if you have another wheel suggestion for me to look into.
--------------------  |
Posts in this topic
bsamps4 Rota G-Force Wheels May 12, 2011 - 11:35 AM
mak5603 Anything under 25mm spacer won't be flush at a... May 12, 2011 - 11:55 AM bsamps4 It is so hard to find a wheel that I like in the d... May 12, 2011 - 11:57 AM 95CelicaST The Celica is kind of screwed on wheel selections.... May 12, 2011 - 12:18 PM
808celica QUOTE (95CelicaST @ May 12, 2011 - 7... May 12, 2011 - 11:10 PM mak5603 QUOTE (808celica @ May 12, 2011 - 9... May 12, 2011 - 11:43 PM block +48? It won't be flush. You need at least a... May 12, 2011 - 12:37 PM Promasta a 20 mm spacer would be fine since the wheel is 17... May 12, 2011 - 12:38 PM block Concave will not be noticeable unless the offset i... May 12, 2011 - 12:58 PM yellowchinaman sits perfectly on ours May 12, 2011 - 2:08 PM 95CelicaST ? What sits perfectly?
What are the wheel specs?... May 12, 2011 - 2:43 PM HectortheRican Just takes some looking. I know that I'm going... May 12, 2011 - 5:08 PM whatthe These also come in 17x8 +35 have a look May 12, 2011 - 7:59 PM bsamps4 Yellowchinaman what are those? May 12, 2011 - 8:14 PM 808celica these kinds of threads are starting to piss me off... May 12, 2011 - 11:06 PM Promasta 808 we know the wheels exist, but the problem is t... May 13, 2011 - 12:55 AM yellowchinaman http://www.rarerims.co.uk/wheelshop_produc...p;pro... May 13, 2011 - 2:12 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: September 16th, 2025 - 5:26 PM |