 CANT BLEED CLUTCH LINE, can someone help |
 Jul 13, 2011 - 10:50 AM
|
 
|
|
Enthusiast  Joined Sep 22, '10 From pomona, ca Currently Offline Reputation: 1 (100%)  |
hey whats up every one, just recently i pulled out my motor, rebuilt it completely and installed a new clutch.
yesterday i finished dropping the engine back in the car, im almost done hooking everything up. i reconnected the clutch line back to the slave cylinder, but im not getting any pressure on the clutch pedal. i tried pumping the pedal multiple times, and then had someone open the bleeder valve but no fluid is coming out at all, the reservoir tank is full, and it worked fine before i pulled the engine out. i tried bleeding for about an hr with no luck. is there another way of bleeding the system? 
|
Posts in this topic
batcavee00 CANT BLEED CLUTCH LINE Jul 13, 2011 - 10:50 AM
batcavee00 Anyone? Jul 13, 2011 - 5:14 PM Batman722 keep trying.
maybe the slave is bad. Jul 13, 2011 - 5:24 PM presure2 Mightyvac FTW
its a hand held vac pump make to ble... Jul 13, 2011 - 5:36 PM batcavee00 The vac sounds good. Ill give it a try. Ive heard ... Jul 15, 2011 - 9:22 AM Cuts_the_Pilot Had this issue with a mates ae82, it turned out to... Jul 15, 2011 - 6:20 PM
batcavee00 I got it to work after all, its easier to do it wh... Jul 16, 2011 - 6:18 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 20th, 2025 - 1:44 PM |