 Got my 7A-FE back from the machine shop...., need some advice |
 Jul 9, 2012 - 11:55 PM
|
 
|
 Enthusiast  Joined Mar 15, '12 From Wrightstown, NJ Currently Offline Reputation: 6 (100%)  |
So I just finally got my engine back from the machine shop.
 ...Of course, being paranoid like I am, I installed the new bearings and threw some plastigauge on each main journal to check clearance. According to the Haynes manual it's supposed to be between 0.0006" and 0.0013". Well, after torquing down the caps ( in proper order, multiple passes to 44 ft./lbs ), it looks like my oil clearance is between 0.0015"-0.002" across the board. So basically, I just need some advice on how severe of an issue this actually is, and if I should be taking it back to the machine shop to have it re-done "right".  Edit: Just wanted to add that I did the measurement 100% dry... no oil under or on the bearings or journals (of course super careful not to turn the crank in this state). I'd much rather hear that I did something wrong (if indeed I have) than incur additional machine shop delays or end up on a wild goose chase! This post has been edited by PaukST: Jul 10, 2012 - 12:54 AM -------------------- 1989 Celica ST Automatic "King Cobra" -- 2005-2006
1994 Celica ST 5-speed "King Cobra II" -- 2011-???? |
Posts in this topic
PaukST Got my 7A-FE back from the machine shop.... Jul 9, 2012 - 11:55 PM
Box Specs are there for a reason, but being such a sma... Jul 10, 2012 - 1:16 AM Smaay you are fine. 1.5 to 2 thousands is ok.
this is ... Jul 16, 2012 - 9:33 AM
PaukST Awesome, thanks Smaay. I decided to rebuild anyway... Jul 19, 2012 - 11:43 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 20th, 2025 - 12:38 PM |