 Enkei RP01, 16x8 |
 Sep 27, 2015 - 4:01 PM
|
 
|
 Enthusiast  Joined Jan 17, '08 From JB MDL, NJ Currently Offline Reputation: 30 (100%)  |
So, as ive posted in "today i".....got a set of RP01's. I was planning ahead on getting the parts required to mount these things, so I reached out to Enkei and asked what the center bore was so I can get some rings. I was told 72.6. Cool, order some hubcentric rings, but I waited untill I took some actual measurements to verify. Get them in, old rubber gone and I take bore measurements. When I measured it was about 55 mm (used eyes and ruler, hard to get a good caliper reading due to space). I decided to mount them to the hub and perfect fit.
Just wondering why an aftermarket wheel fits perfectly to my hub when most are a large bore to accommodate everyone. |
Posts in this topic
Spider77 Enkei RP01 Sep 27, 2015 - 4:01 PM
BonzaiCelica All. 6gc have same hub 54.1mm
Smallest bore I... Sep 27, 2015 - 4:42 PM Spider77 I got that our hub is 54, the wheels are supposed ... Sep 27, 2015 - 5:46 PM
jordisonjr QUOTE (Spider77 @ Sep 27, 2015 - 5:4... Sep 28, 2015 - 8:19 AM Spider77 Maybe...either way its good to know I wont need ri... Sep 28, 2015 - 2:33 PM Chromed I have the same wheels with the same specs. Oct 16, 2015 - 6:36 AM Spider77 QUOTE (Chromed @ Oct 16, 2015 - 7:36... Oct 18, 2015 - 12:37 PM Spider77 The specs I have, or the factory specs? The compa... Oct 16, 2015 - 6:08 PM Chromed QUOTE (Spider77 @ Oct 16, 2015 - 6:0... Oct 19, 2015 - 5:30 AM Spider77 Thanks for the verification on the bore on yours. ... Oct 19, 2015 - 11:29 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 20th, 2025 - 1:37 PM |