 Axle seems stuck?, In-out play is reduced |
 Oct 22, 2016 - 3:50 PM
|
 
|
 Enthusiast  Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%)  |
So just finished installing the front LCAs with poly bushes and everything is going fine, until I try to reinstall the driver side upright. It seems like the in-and-out play of the axle is vastly reduced, like something is obstructing movement within the boot.
This issue is not letting me reinstall the upright because I cannot get it to reach the installation points. Either I bolt it to the strut knuckle and I can't swing it into the ball joint mount, or I bolt up the ball joint and I can't get it to the strut knuckle. The passenger side went in just fine. Any ideas? -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
Posts in this topic
HectortheRican Axle seems stuck? Oct 22, 2016 - 3:50 PM
HectortheRican Here's a picture of the driver side axle when ... Oct 22, 2016 - 5:03 PM slavie If you over-extended the outer joint and it slippe... Oct 22, 2016 - 7:57 PM
HectortheRican QUOTE (slavie @ Oct 22, 2016 - 6:57 ... Oct 22, 2016 - 8:35 PM slavie QUOTE (HectortheRican @ Oct 22, 2016 - 8... Oct 22, 2016 - 11:41 PM Bitter If the inner joint was over extended and it droppe... Oct 22, 2016 - 9:30 PM HectortheRican The same thing happened to my pass. side axle, but... Oct 24, 2016 - 12:59 PM HectortheRican I've got the inner CV joint apart right now an... Oct 24, 2016 - 1:26 PM slavie So what you're saying is that the axle will no... Oct 25, 2016 - 9:49 AM HectortheRican Yeah, unfortunately. I went out again today to cle... Oct 25, 2016 - 5:41 PM SwissFerdi Have you compared it side-by-side with the old axl... Oct 26, 2016 - 7:37 PM HectortheRican I tried one last time to try and get the **** thin... Oct 27, 2016 - 6:57 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 16th, 2025 - 4:42 PM |