getting 3sgte, want 350+hp Options

[dans_st]

I am purchasing a st185 RC 3SGTE that I am going to pick up in Jan., Basically what can I do to reach 350hp with under $2,000?

I already have a upgraded fuel system, boost controller, and am about to purchase a Greddy E-manage ULTIMATE, I plan on using everything that is on car as I can on my new setup.
I have already recieved another GT32 turbo that I plan on using on the 3S

So basically what can I do to get around 350HP and is my budget high enough to do so?

here is a list on my engines mods. I know ALOT of the parts I won't be able to use but what do i need to reach my goal?

Thanks for all your help guys...

Performance Modifications
////////////////////////////////////
ITS GT32 turbo
3.5" downpipe
HKS SSQV blow-off valve
HKS 65mm BOV flange
2.5" intercooler piping
Apexi SAFC-II version 2
Turbo smart boost controller
Turbosmart 38mm wastegate
Autometer COBALT boost guage
Mishimoto 31"x11"x3" intercooler
KOYO Radiator
KOYO 1.3bar radiator cap
RC engineering 550cc injectors
Walbro 255lph fuel pump
Fuel pressure regulator
port & polish on head
port on intake & throttle body
intake manifold powder-coated black
valve cover powder-coated black
ZOOM clucth
INNOVATE LM-1 wideband O2 with datalogger
fast-turbo oilfilter relocation kit
Goodridge -6an fuel lines from tank
OBX fuel rail
Aeromotive in-line fuel filter
Aeromotive boost dependant fuel pressure regulator
magna flow exhaust
full 3.5" exhaust from manifold
(all Magnaflow 3.5" mandrel bends)
HKS filter
HKS catch-can
MSD sportcompact ignition plus
MSD custom fit 8.5mm wires
MSD Blaster SS coil
NX N-tercooler sprayer w/CF bottle
NX 35 SHOT w/RPM window switch
battery relocation to hatch
8ga. power wire to MSD and Walbro fuel pump
TRD short shifter
all new trans. cables,washers, bushings, ect...