 Fuel rail removal/install |
 Jun 3, 2008 - 11:36 AM
|
 
|
 Enthusiast  Joined Jan 13, '06 From UnderTheGround403 Currently Offline Reputation: 2 (100%)  |
OK so, I swapped my injectors out, but now have a massive air leak coming from the rail itself not being seated properly. I'm not 100% sure of how many/what o-rings/spacers/insulators are needed to properly RnR the rail, so does anyone have a diagram of the rail/injectors and ALL the parts needed to RnR it, and where which parts should go?
I did the 2 bigger o-rings on the injectors themselves when they were out, but that was it. For parts I have to order from toyota I have: 23291-75010 x 8 (injector insulator/FR cushion) 23845-88380 x 4 FR to head insulator 90561-08032 x 3 FR spacer Would that be all? I just want to make sure I get everything the first time. This post has been edited by 6gsillyca: Jun 3, 2008 - 10:42 PM |
Posts in this topic
6gsillyca Fuel rail removal/install Jun 3, 2008 - 11:36 AM
Defgeph Sounds like you ripped one of the four o-rings bet... Jun 3, 2008 - 2:47 PM 6gsillyca Is there any sort of diagram on the bgb of all of ... Jun 3, 2008 - 10:12 PM
Defgeph QUOTE (6gsillyca @ Jun 3, 2008 - 11... Jun 3, 2008 - 11:20 PM lagos 3 sets will set you back about 60bucks, so I dont ... Jun 3, 2008 - 11:15 PM 6gsillyca Ok thanks guys. I'm not actually sure if I put... Jun 4, 2008 - 1:31 AM Defgeph take some pics to verify we are talking about the ... Jun 4, 2008 - 5:23 AM Batman722 and a close up of the injector w/o rings and part ... Jun 4, 2008 - 8:52 AM 6gsillyca Thanks Dustin. Just what I was looking for.
I don... Jun 4, 2008 - 11:46 AM Batman722 hold up, that's a USDM diagram.
It should be ... Jun 4, 2008 - 11:49 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 25th, 2025 - 5:43 PM |