![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 8, '10 From North Carolina Currently Offline Reputation: 0 (0%) ![]() |
just the responses i was looking for! motivation is all i need.... and money, thats for sure
|
![]() |
|
Enthusiast Joined Oct 30, '07 From Raleigh, NC Currently Offline Reputation: 0 (0%) ![]() |
I'm in Clayton which is about 25 min east of Cary.
Looks like quite a few Triangle area people on here. Good luck with the build. |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 8, '10 From North Carolina Currently Offline Reputation: 0 (0%) ![]() |
nice, more and more people are coming forth. Good to hear
|
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 8, '10 From North Carolina Currently Offline Reputation: 0 (0%) ![]() |
Well i got some maybe bad, maybe not so bad news. Ive had a vac/boost gauge installed on my car for 2 weeks. For the past week the it was reading 15 in hc and moving rapidly with a very low idle once it was warmed up. Checked my oil today(just changed it) and its black, with a nice smell of gas. Not going to jump to any conclusions but i need to do a leak down test to make sure my rings are still good. For now turbo is on hold.
|
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 8, '10 From North Carolina Currently Offline Reputation: 0 (0%) ![]() |
going to run a compression test tonight after work. Hopefully i see some good numbers.
|
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Feb 8, '10 From North Carolina Currently Offline Reputation: 0 (0%) ![]() |
sorry i havent been on in a while. been busy with school. compression ran 150 across all cylinders. And i solved my fuel problem. Put a fuel fitting i got at the parts store on the rail and im running directly off the aftermarket reulator. Running 20psi and it feels better then stock. Keep in mind i do have the 315cc injectors in. Stock fuel pressure is 35-40 psi
|
![]() ![]() |
Lo-Fi Version | Time is now: September 13th, 2025 - 10:40 AM |