![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Aug 11, '09 From Buffalo, NY Currently Offline Reputation: 15 (100%) ![]() |
So I just finished putting lambo doors on my car with my buddy, rewired everything today and everything works except my locks. I can hear the relay going off behind the dash whenever I press the lock button, passenger or driver side, but the locks won't flip.
When cutting the wires to the door, I know I blew the dome fuse and that's been replaced already - is there a fuse I may have popped that controls the locks? I made sure I matched up every wire, color to color and pattern to pattern (there were a couple grey wires, one had single silver dots, the other had doubles) but I have no idea where I would start - obviously there isn't a fuse labeled locks, and my windows and mirrors work fine. All help is appreciated, thanks! -------------------- ![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Apr 28, '09 From York pa Currently Offline Reputation: 3 (100%) ![]() |
pics of the lambo doors.... >.>
|
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) ![]() |
you have a lose wire that connects to your locking system...my was a green wire behind the plastic protector near the driver side rest pedal...where all the wirings are on the bottom. check there
|
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Aug 11, '09 From Buffalo, NY Currently Offline Reputation: 15 (100%) ![]() |
you have a lose wire that connects to your locking system...my was a green wire behind the plastic protector near the driver side rest pedal...where all the wirings are on the bottom. check there I only cut the wires outside the door though, so I don't understand how it would be inside the car. -------------------- ![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 29, '05 From So-Cal Currently Offline Reputation: 12 (100%) ![]() |
re-check the wires...sounds to me like a loose wire regardless...tug each wire that was cut if you put back if it is loose.
|
![]() ![]() |
Lo-Fi Version | Time is now: September 2nd, 2025 - 6:33 PM |