 master to slave |
  |
 Sep 22, 2011 - 11:26 PM
|
 
|
 Enthusiast  Joined Mar 4, '10 From Bronx NY Currently Offline Reputation: 3 (100%)  |
here is a question... I dont have a hard line for the master cylinder I installed for the clutch.. whats can i safely use to run from there to the slave on the transmission ????
-------------------- Always fast and going for the look......
 |
|
Sep 22, 2011 - 11:40 PM
|
|
 Enthusiast Joined Apr 23, '08 From Muskego,Wi Currently Offline Reputation: 8 (100%) |
your going to need a rubber line or stainless line some where in between the two because of the engine flexing.........
-------------------- 2nd Gen 3s-gte.... It lives!
97celiman "92-gt-quit making up random acronyms that dont mean anything. the only real acronym is JDM" |
|
Sep 26, 2011 - 10:45 AM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
you shouldn't have to open the system at all. just unbolt the hard line from the transmission and move it out of the way
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Sep 26, 2011 - 8:56 PM
|
|
|
Enthusiast Joined May 16, '10 From Raleigh Currently Offline Reputation: 12 (100%) |
you should just buy the hard line from toyota
--------------------  |
|
Sep 26, 2011 - 9:10 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
QUOTE (bsamps4 @ Sep 26, 2011 - 9:56 PM)  you should just buy the hard line from toyota agreed. perfect fit and probably around $20. -------------------- |
|
Sep 26, 2011 - 9:46 PM
|
|
|
Enthusiast Joined Mar 4, '10 From Bronx NY Currently Offline Reputation: 3 (100%) |
Okay suggestions ... wich one the hard line part order from gt4 or just the regular celica gt manual???? and also why not just a rubber line made for the brake system and get the fittings for that tranny ...
QUOTE (Batman722 @ Sep 26, 2011 - 10:10 PM) QUOTE (bsamps4 @ Sep 26, 2011 - 9:56 PM) you should just buy the hard line from toyota agreed. perfect fit and probably around $20. -------------------- Always fast and going for the look......
|
|
Sep 26, 2011 - 10:31 PM
|
|
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
 clutch hard line #31481-20750 the rubber line #90931-01108 (st204) This post has been edited by Batman722: Sep 26, 2011 - 10:31 PM -------------------- |
|
Sep 26, 2011 - 11:59 PM
|
|
|
Enthusiast Joined Mar 4, '10 From Bronx NY Currently Offline Reputation: 3 (100%) |
ok but heres the thing i have a mr2 tranny the e153 but off the mr2.. it has the bleeder line, then going to the frame holding the clutch.. then out of the frame is the rubber line going to the second hard line ... how do u get from the rubber hose you told me to buy then to go to the diffrent kind of slave cylinder .....
QUOTE (Batman722 @ Sep 26, 2011 - 11:31 PM) clutch hard line #31481-20750 the rubber line #90931-01108 (st204) -------------------- Always fast and going for the look......
|
|
Sep 27, 2011 - 8:48 AM
|
|
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
I don't understand.
-------------------- |
|
Sep 27, 2011 - 8:58 PM
|
|
|
Enthusiast Joined Mar 4, '10 From Bronx NY Currently Offline Reputation: 3 (100%) |
QUOTE (Batman722 @ Sep 27, 2011 - 9:48 AM) I don't understand. 
-------------------- Always fast and going for the look......
|
|
Sep 29, 2011 - 1:00 AM
|
|
|
Enthusiast Joined Mar 4, '10 From Bronx NY Currently Offline Reputation: 3 (100%) |
bump
-------------------- Always fast and going for the look......
|
|
Sep 29, 2011 - 7:13 AM
|
|
 Enthusiast Joined Apr 17, '06 From New Jersey Currently Offline Reputation: 105 (100%) |
when I did mine I used my ST205 slave and lines, exactly because I was having issues finding the right hose for the stupid mr2 connection.
you can go to autozone and order a camry V6 manual trans slave and the line from the dealer, or maybe someone has a used one from the ST205 clip / engine set. Good luck --------------------  |
|
Sep 29, 2011 - 9:33 AM
|
|
 Enthusiast Joined Jul 30, '04 From colorado Currently Offline Reputation: 1 (100%) |
|
|
Sep 29, 2011 - 6:54 PM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
you can just buy compatible hard lines at Napa and bend them accordingly done deal, done it before. Although OEM is game.
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2025 - 3:38 AM |