Custom Projectors Headlights, and the celica start the change Options

[yagamius]

well since i have my celica i found out about the kouki projectors, and definitely is most for many of us who want to give a nice touch to our cars.

considering where I live is almost impossible to get one of those sets even when I have an address in US that send the stuff I buy there to my country, I dont trust my customs they might crack one of the headlights and they don't get responsible of it

beside they are kind of expensive

so why not create a the projectors my own for my celica.

I start my search here to find a place that can make the clear lens covers for my headlights in Acrylic or Glass (if i was lucky enough no one works on glass any more or at least here )

finally a found the place that can make the cover lens in Acrylic....

son once that was complete I start my search on the web for projectors with halo ring (sexy) and as always ebay had my answer.

here is my guide

found the perfect kit for my homework:

things that came in my kit

Projectors with white Halo Ring x2
xenon bulbs 6000K x2
HID ballast x2



now that I have the kit and the lens are in the process of creation I start what I called agony

start at my home trying to find out how to remove the headlights off the car, try to fin out some info on the web with no success, when I checked the page was down (three weeks ago)

so first I start checking and realize that I need to remove the front bumper, so front bumper off



after the bumper went off I thought it was done and now i can remove the headlight, but no, Toyota engineer dosen't make for hopes an dreams and I start coursing the assembly line

and why because of this



after taking a break came back to remove the defense of the car







once the defense off the car, finally I can remove the headlights and start with the real deal





now the tools that i use to remove the glass lens of the headlights was my sister hairdryer, Not kidding

after a few burn out with the hot air cuz my dad look to the other side I was able to remove the four lens of the headlights.

just a couple of modifications have to be made to the headlights and is for the halo ring cable





made the little hole with a and saw and then wear down with a rounded file to let the wire go out for the same place



when finish I wash up the headlights to remove all dust and other things and let it dry on air



after that I went to the hardware store and bought dark gray spray No. 17 to spray out the background of the low light

before spray the things out cover the high light reflection with paper, we need that to reflect more light



and sand paper the reflection thing from the low light, we don't need it any more we have projectors now.

sand it with 1000 paper sand and little water

before


after


spray the headlights let it dry and them pull all together



projector and lens





wired the cables for the halo and headlights

by the way for the halo I use the same cables that goes to the side lights, so they no blink when i use the directionals

when the things are wired up and headlights are ready re-arm the front of the car

and judge your self

lights off


with parking/halo light


halo close up


xenon working


this was my work creating my own projectors

and most thanks to my cat who's my partner in crime and the only company that I had during this

by the way this cost me less than $220

This post has been edited by yagamius: Nov 13, 2010 - 1:33 PM