 2GRFE v6 convertible |
 Oct 10, 2014 - 1:41 AM
|
 
|
 Enthusiast  Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%)  |
Decided to start part 2. Part 1 got locked at my request, it was going no where. This time is final, and a tribute to my car...
This will mostly be a journal. Not a how to. No where else to keep records. You are welcome to ask questions. No 2gr info here, there is a separate thread... This car has not been driven in 8 months, it has been used as a parts car, for the mr2, and the previous celica sold. Unfortunately, because of this, its getting new parts, or parts are getting blasted and painted. The car currently is a sad vision, 7 years of use, last 3 of neglect... few pics of current condition... ( no wipers, no knuckles, no seats, no steering, etc, etc, etc...) DSCN1313  DSCN1308  DSCN1310  holes left from removing things.. DSCN1312  the knukcles ive got, are rusted.... DSCN1311  Most recently decided to pull all the wiring, for the cruise control. I will never use it so... E3C0FF98  it was sent away EED8DDA9  while i was there... 1FDA2065  then.. B483D95E  over the next few weeks will bring it back to life again..... This post has been edited by njccmd2002: Mar 1, 2020 - 2:39 PM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
 |
Replies
(1 - 99)
|
Oct 10, 2014 - 1:38 PM
|
|
 Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
aaaaaaand in the trash. I always enjoy the humor in your posts.
--------------------  |
|
Oct 10, 2014 - 2:08 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
lol. i cant help it. Im working this week, but managed to put 2 hours in the car....
removed AC unit, and finished removing brown wire that feeds the cruise ecu at 16 pin. DSCN1355  while i was there cleaned the a/c evaporator, and sprayed lysol.... DSCN1354  whipped out some flex tubing in various sizing, what is that? it looks like this... DSCN1356  and then started to do the rewiring process, and halfway done there. I have to admit, its hard, but the results are great. DSCN1357  i have some wiring upgrades to make to the other side, since there is no cruise control, now i have a stalk, and 4 empty slots at the clock spring. So I may replicate Daniels, radio controls... This post has been edited by njccmd2002: Sep 24, 2017 - 12:52 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 10, 2014 - 2:14 PM
|
|
 Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
looks like quite a mess but I have faith in you berto. You never cease to amaze us all.
--------------------  *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Oct 10, 2014 - 4:39 PM
|
|
 Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
That's some serious dedication to weight reduction.
-------------------- 2001 Miata LS 5-speed
|
|
Oct 10, 2014 - 5:07 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
QUOTE (cheela @ Oct 10, 2014 - 2:14 PM)  looks like quite a mess but I have faith in you berto. You never cease to amaze us all. this car is my baby... QUOTE (Box @ Oct 10, 2014 - 4:39 PM) That's some serious dedication to weight reduction. it was 2 pounds total. ecu, cables, wiring and actuator.... i am actually learning a lot, and will tap some wires in the main harness for other things..... -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 10, 2014 - 5:32 PM
|
|
 Enthusiast Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) |
Excellent Man. Please post as much details as you can. posts like these are treasures.
|
|
Oct 13, 2014 - 7:24 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
wiring is a tedious process.
created a small harness of 5 wires... DSCN1358  to use in the cruise control plug, to take advantage of the clockspring.. DSCN1359  looks now like this... DSCN1360  then proceeded to rewire the harness again... DSCN1363  and almost done for exception of the steering column... DSCN1361  and here is my harness that comes from the cruise plug. it exits with the ac control plugs... DSCN1362  dont know what ill use this for, maybe audio controls from the steering wheel. they are there as option... and all this just took 5 hours, of soldering and taping... This post has been edited by njccmd2002: Sep 24, 2017 - 12:56 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 13, 2014 - 11:41 PM
|
|
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
good work dude
-------------------- |
|
Oct 14, 2014 - 3:35 PM
|
|
 Enthusiast Joined Nov 30, '04 From Atlantic City Currently Offline Reputation: 21 (100%) |
awesome Berto!
-------------------- |
|
Oct 14, 2014 - 6:13 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
thanks guys. I know its nothing to be proud, but i need to really clean this wires, and stuff i undid in the past. This is the last time i mess with my car....
today i finished the steering colum DSCN1366  reinstalled the dash frame, and wired the amp wire on top of it to the center. i got tired of hitting it... DSCN1367  im doing jdm fenders, so i figured i had to mess with this... DSCN1368  all said and done.. Relocated the amp wire and tucked it under the fender, rewrapped the harness, after i had it all a mess. and it looks like this... DSCN1370  moving onto the dash.., nothing too serious, just need to professinally tuck the harnesses for the jdm power mirros. those are hanging on the sides.... DSCN1371  once i install the drive by wire pedal, and plug some holes, i will be reinstalling the dash again, for it never to come out.... (crosses fingers) .... This post has been edited by njccmd2002: Sep 24, 2017 - 1:01 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 15, 2014 - 12:22 PM
|
|
 Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
You are going all out on this car. I am jealous and impressed. Come do mine next!
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
 2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Oct 15, 2014 - 1:14 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Lol... No! I know youll do the same. Need to finish this car so i can move on. Cant keep modding it forever...
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 15, 2014 - 1:50 PM
|
|
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
need to see some progress on that RA man.... hahaha.
-------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Oct 24, 2014 - 7:12 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
let me finish this one...
so few things, i had lined up.. prettier TRD cover, its legit, but not sure real CF DSCN1380  and finally finished the pedal, (discussed in the 2grfe swap section), pain in the ass to make DSCN1378  most of the inner wiring has been done, and its finished.. DSCN1381  just a few details here and there and boom... FRS Seats!!! 034150A6 
This post has been edited by njccmd2002: Sep 24, 2017 - 1:08 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 24, 2014 - 9:01 PM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
thats a nice looking seat, what is it?
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Oct 24, 2014 - 10:06 PM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
No center tach?
-------------------- |
|
Oct 24, 2014 - 10:39 PM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
QUOTE (Smaay @ Oct 24, 2014 - 9:01 PM) thats a nice looking seat, what is it? FR-S. -------------------- 2001 Miata LS 5-speed
|
|
Nov 12, 2014 - 10:38 AM
|
|
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Any updates, or just looking into the PS and A/C lines?
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Nov 13, 2014 - 7:35 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
well not that many, since working on the swap delayed me a lot. little here and there.
Since the FRS seats dont fit, got a steamer finally to steam the foam and rejuvenate it, and wrap the oem seats in leather... DSCN1364  however, the stupid leather upper covers dont fit, they have somehow shrunk.... made a custom line for low pressure power steering. more info on the swap... DSCN1469  cleaned the subframe DSCN1463  and painted it... DSCN1473  painted the power steering rack. DSCN1464  and trying to hack some enlinks for the front. DSCN1472  cant do the engine wiring because i dont have a spcific plug, and it sucks.. so im just doing bits here and there.. This post has been edited by njccmd2002: Sep 24, 2017 - 1:41 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 13, 2014 - 8:08 PM
|
|
|
Enthusiast Joined Mar 6, '13 From New jersey Currently Offline Reputation: 4 (83%) |
What did you do with those cruise control wires? I wouldve bought them
-------------------- QUOTE (Azncelica @ Mar 4, 2012 - 11:43 PM) I started with what I know to do, I swap engine into my car, I knew it was too much work to make it a AWD. I kept it FWD. Went to take a crack at doing the wiring conversion. Than, I realize, shoot, this is out of my league. |
|
Nov 13, 2014 - 10:00 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
QUOTE (Arturio55 @ Nov 13, 2014 - 7:08 PM) What did you do with those cruise control wires? I wouldve bought them sold to a member here... 
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Dec 22, 2014 - 10:09 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
ok just in case you are watching tonight.
Time to step away from the swap, and tinker the car.... opened the boxes that are accumulating dust in corners.. DSCN1516  DSCN1518  Nailed it!!! DSCN1519  second time around, this time, easy! DSCN1517  mounted on a clean and painted subframe.... DSCN1520  and a freshly painted rack... DSCN1524  will tray to update more tomorrow.... i need to clean those boots.... lol This post has been edited by njccmd2002: Sep 24, 2017 - 1:48 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Dec 22, 2014 - 10:48 PM
|
|
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
That looks amazing man. I tried to paint a subframe as well but made the mistake of using por 15 in roll-on form. Next time I'll just use the eastwood stuff
-------------------- |
|
Dec 23, 2014 - 8:20 AM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
Looks great Berto.
It gets easier every time 
-------------------- |
|
Dec 23, 2014 - 9:36 AM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
QUOTE (Batman722 @ Dec 23, 2014 - 7:20 AM) Looks great Berto. It gets easier every time yes it does... QUOTE (enderswift @ Dec 22, 2014 - 9:48 PM) That looks amazing man. I tried to paint a subframe as well but made the mistake of using por 15 in roll-on form. Next time I'll just use the eastwood stuff eastwood is the bomb. pricy, but worth it. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Dec 23, 2014 - 2:25 PM
|
|
|
Enthusiast Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) |
I wish I lived in your neighborhood! Excellent work as ususal
|
|
Dec 23, 2014 - 5:40 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
few last things, buttoning up the year..
kirkosaurus DSCN1528  DSCN1525  i decided not to plate but to paint these.. DSCN1526  DSCN1527  slapped the st205 cables... DSCN1530  and buttoned up the engine and the subframe.. DSCN1534 
This post has been edited by njccmd2002: Sep 24, 2017 - 1:53 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Dec 23, 2014 - 6:10 PM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Looking good! Can't wait for it to be finished!
-------------------- 2001 Miata LS 5-speed
|
|
Dec 23, 2014 - 7:21 PM
|
|
 Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (njccmd2002 @ Nov 13, 2014 - 6:35 PM) and trying to hack some enlinks for the front.  What length did you cut the bolt for those endlinks? I was actually considering doing exactly this. -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Dec 24, 2014 - 9:36 AM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
I just cut a bolt i had . Nothing is done to the end-links or the bolts it came
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Dec 24, 2014 - 1:43 PM
|
|
 Enthusiast Joined Jan 30, '14 From Cortland NY Currently Offline Reputation: 5 (100%) |
Now I can't wait for next year, looking really good
-------------------- 1997 ST:Limitedly Green
This car is not about racing... This car is not about power or performance... It's purely about being cool. |
|
Jan 6, 2015 - 6:10 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
few more things, im flip flopping now to interior, I was bored of working in the engine...
i got rid of the dreared big willie. Used a brake from a 2001 celica... DSCN1556  extensive modifications, and it is nice looking.. DSCN1560  DSCN1558  I spent some time cleaning the car, and cleaning the interior, cleaned the carpet... DSCN1557  it was all dusty, and also going to be old school again, i cannot ever get satisfied with an aftermarket stereo... So i whipped this.... DSCN1559  Untested, from the yard, its a 6 disc, and i will use a blue tooth adapter or something, i dont know, lol.... update 9/24/17 sold the radio.... This post has been edited by njccmd2002: Sep 24, 2017 - 1:58 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Jan 6, 2015 - 7:04 PM
|
|
|
Enthusiast Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) |
lovely find on the Stereo. Old School is always reliable!!
Which car/truck this came out of if you don't mind me asking? |
|
Jan 6, 2015 - 8:02 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
four runner. took the amp as well, but i cut the wires, and later i regretted.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Jan 6, 2015 - 10:08 PM
|
|
|
Enthusiast Joined May 10, '14 From Tulsa, OK Currently Offline Reputation: 5 (100%) |
that is nice one. You don't find those any more. Most of them are one piece with green screen.
|
|
Jan 8, 2015 - 10:38 PM
|
|
|
Enthusiast Joined Jan 30, '14 From Cortland NY Currently Offline Reputation: 5 (100%) |
With the 7gc e-brake, was it modifying the plastic trim on it to get it to work or did you have to do more?
-------------------- 1997 ST:Limitedly Green
This car is not about racing... This car is not about power or performance... It's purely about being cool. |
|
Jan 8, 2015 - 10:41 PM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
I was looking at some 5th gens earlier and it seemed their handbrake was shorter as well. I guess for whatever reason they decided the 6th gen's should be ginormous.
-------------------- 2001 Miata LS 5-speed
|
|
Jan 8, 2015 - 11:31 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
i did not take pics of the process, i figured no one would be interested. Significant amount of welding is required...
I extended the tube that holds the screw, and the curve at the bottome that holds the cable. also had to modify both legs, extend on peg by 1 cm, and completely move a leg. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Jan 16, 2015 - 8:02 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
had some fun blasting and painting a few parts here and there...
DSCN1563  DSCN1565  DSCN1564  DSCN1566  DSCN1567  even the wires for the seats lol DSCN1561 
This post has been edited by njccmd2002: Sep 24, 2017 - 2:08 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Jan 17, 2015 - 3:06 AM
|
|
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
good job as always berto
-------------------- |
|
Jan 17, 2015 - 8:23 AM
|
|
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
I always hated putting those axles back together, have fun.
Are those from your seats ? -------------------- |
|
Jan 17, 2015 - 7:08 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
hahahah, yes they are the wires in the seats, i kept wondering whos going to ask... they were so badly rusted, that i decided to clean them up.
I had to rebuild the axles, as they were north axles, with a lot of rust. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Jan 17, 2015 - 7:52 PM
|
|
|
Enthusiast Joined Nov 30, '04 From Atlantic City Currently Offline Reputation: 21 (100%) |
awesome stuff!
-------------------- |
|
Feb 4, 2015 - 8:49 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
decided to skip the whole shabang, and just in case you are listening..
new tierods, wheelbearing, lower ball joint, and no more rust. The red, is stainless steel brake lines... 48CB1F6A 
This post has been edited by njccmd2002: Sep 24, 2017 - 2:16 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Feb 5, 2015 - 6:56 PM
|
|
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
sexy. You always do clean work man, keep it up
-------------------- |
|
Feb 5, 2015 - 7:23 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Thnks. There were more pics. But 1 posted tell more words...
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Feb 5, 2015 - 8:31 PM
|
|
|
Enthusiast Joined Nov 30, '04 From Atlantic City Currently Offline Reputation: 21 (100%) |
good stuff as per usual!
-------------------- |
|
Feb 5, 2015 - 9:14 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
when i do the other hub, ill place pics...
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Feb 5, 2015 - 9:15 PM
|
|
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
I think I need to drop my Supra off at your house for about 6 months. I need some shiny new suspension parts too! It's strange to see such a familiar looking suspension setup but so shiny and painted, not all rusty and worn like mine...
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Feb 6, 2015 - 12:32 PM
|
|
 Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
Tell me about it Daniel....
Great work as usual 'Berto! -------------------- ~bloodMoney
 |
|
Feb 25, 2015 - 8:28 PM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
So I just wrapped up a water pump job on a 2GR Avalon today, I'm pretty sure you'll need to remove your engine to do the water pump in your car if you ever need to. It's pretty tight, there's some bolts that don't even come out all the way, you have to just tilt things and raise the engine a little and even then it's hard. It all fits but it's real skin of the teeth stuff.
-------------------- |
|
Feb 25, 2015 - 11:04 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
surprisingly no, there is not mount there. There was, it came with, but im not using it. yes its very tight. but it can be taken out with some technique. I have not done anything to the car, the cold temperatures, makes me not want to work. LOL.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Feb 25, 2015 - 11:14 PM
|
|
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
but winter is supposed to be build season
-------------------- |
|
Feb 25, 2015 - 11:40 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
haha, i know, but I just need to build up courage, to work on it, and frankly the hart part is done, but too many frustrations on the little things here and there.... and then i just, go inside, and then i have to work...
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Feb 27, 2015 - 10:12 AM
|
|
|
Enthusiast Joined May 29, '09 From Gainesville, FL Currently Offline Reputation: 17 (100%) |
Liking it!
|
|
Mar 4, 2015 - 7:23 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
pressed the other bearing..
DSCN1590  DSCN1591  cant stress enough DSCN1589  hub being pressed in DSCN1592  another pretty sight.. DSCN1593  working on axles.. DSCN1594  DSCN1595  new things for the power steering DSCN1597  preview... DSCN1598  if you can make those stupid brakes work.... This post has been edited by njccmd2002: Sep 24, 2017 - 2:28 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Mar 4, 2015 - 7:39 PM
|
|
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
do you dislike using the press as much as I do? Readjusting things a million times is always such a pain..
-------------------- |
|
Mar 4, 2015 - 8:51 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
yea its a pain, however without it. so many things, u cant get done without it.....
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
May 4, 2015 - 9:57 AM
|
|
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
BUMP!
I hope things are still coming along
-------------------- ~bloodMoney
|
|
Aug 1, 2015 - 10:02 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
So after an absence in the garage. after freaking back surgery, Good weather. Went back and revised what was missing for this badboy to run.
If it does not exist. Make it. So there is no low pressure line that will fit. So i finished the line i needed. 682B00E3  So it looks pretty. Need to wait to dry!!! 485168FC  After which i decided to finish up the custom high pressure ps line. 520CA9B5  With the modified bracket. It was installed 2739787B  Next step was the heater hoses... 7648613F  Then i went and prepared the return radiator hose. Well its hybrid. No other ways. I hate it but. It will be ok... 089411FA  After installed... 369EA338  0D13592E  Then installed the ac lines... DAD23FED  There is 4 mm of clearance. Oh well. Crossing fingers... 8ECAE45C  Installed drivers side brake line 3FA2E79C  Then finished one axle... 0FE08BC2  Few odds and ends not pictures tightened the power steering rack, installed tranny seals... And replaced the belt.... Thats for now... 5C892438  Cheers.... This post has been edited by njccmd2002: Sep 24, 2017 - 3:10 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Aug 1, 2015 - 11:10 PM
|
|
 Enthusiast Joined Aug 5, '09 From West Texas, USA Currently Offline Reputation: 20 (100%) |
Awesome! Glad to see you get back to work on this!
-------------------- JDM Part King
 |
|
Aug 25, 2015 - 8:34 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Small update.
Fuel lines aned regulator is in 4B0D71B7 
This post has been edited by njccmd2002: Sep 25, 2017 - 12:45 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Aug 26, 2015 - 1:21 AM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Wooo!!!! About how much more until you can at least start it up?
-------------------- 2001 Miata LS 5-speed
|
|
Aug 26, 2015 - 8:59 AM
|
|
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
so close Noberto! keep going at it.
-------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Aug 28, 2015 - 12:59 PM
|
|
|
Enthusiast Joined Aug 4, '06 From Chicagoland Currently Offline Reputation: 9 (100%) |
Looks great Noberto! Makes me wish I hadn't just killed mine.
Again. -------------------- ~bloodMoney
|
|
Aug 28, 2015 - 8:41 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
i saw that. im going slow, in this one, im trying to get the te31 running quick, plus, in no rush, i have no brakes in this car. some days off are coming maybe ill get it started
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Aug 28, 2015 - 9:57 PM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
I just meant getting it turned over so you can rev it some to annoy the neighbours.
-------------------- 2001 Miata LS 5-speed
|
|
Sep 24, 2015 - 10:04 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
scored this from the yard...
1196A7E8  no holes, just have to repaint... oh and i updated the swap thread. This post has been edited by njccmd2002: Sep 24, 2017 - 5:10 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Sep 27, 2015 - 1:10 PM
|
|
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
I'm waiting impatiently for in-car videos of this engine
-------------------- |
|
Sep 27, 2015 - 7:52 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
very soon, very soon.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 4, 2015 - 6:51 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
figured out the brake issue, got a toy to play with...
4062270D  a little investment, goes a long way. lol 3E5D8E63  This post has been edited by njccmd2002: Sep 24, 2017 - 5:11 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 27, 2015 - 8:20 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Stupid axle did not come out. Had to cut it....
151F5504  Little did i know that i can buy it new. Refurbished, what a waste of time.... BB287338  Axle installed... 6C2318C2  Did some interior cleaning A88CFCCC  But i needed somewhere yo seat 73B9A2F3 
This post has been edited by njccmd2002: Sep 24, 2017 - 5:13 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 27, 2015 - 8:34 PM
|
|
|
Enthusiast Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) |
Love those floor mats, wish I could find a set. The 7th gen seats and the door sills work well with the interior. Very nice
|
|
Oct 27, 2015 - 9:18 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
mr2 seats....
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Oct 27, 2015 - 9:27 PM
|
|
|
Enthusiast Joined Jan 19, '09 From Texas Currently Offline Reputation: 12 (100%) |
QUOTE (njccmd2002 @ Oct 27, 2015 - 9:18 PM) mr2 seats.... whoops.. I see it now |
|
Nov 5, 2015 - 2:25 PM
|
|
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
FYI, apparantly your celi went global.
thailand group loves it. lol 
-------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Nov 5, 2015 - 7:25 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
lol, nice, if they only knew its not running for like 1 year now... lol. its nice to know someone likes it..
waiting on the brakes, lol, waiting on brakes. im also doing the Richee fenders, and ditching the jdm. i dont have pics, but soon ill post. some. -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 5, 2015 - 8:52 PM
|
|
|
Moderator Joined Jun 29, '08 From Denver Currently Offline Reputation: 59 (100%) |
Shaved looks a lot better in my opinion, but JDM fenders are a nice touch regardless!
-------------------- "Employ your time in improving yourself by other men's writings, so that you shall gain easily what others labored hard for." -Socrates. Even Socrates told us to use the search button!
2006 Aston Martin V8 Vantage. 1998 Celica GT- BEAMS Swapped. 2022 4Runner TRD Off Road Prenium. 2021 GMC Sierra AT4. |
|
Nov 13, 2015 - 8:16 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Finally the gods are looking upon me... yeah right.. decided not to use the gt4 brakes at all, too complicated, and now i have drilled supra rotors to play frisbee
D1CB1EC8  777129B8  D5AEFD1F  Of course i hate to rebuild. But what can i do. I needed all the hardware. Boy you guys up north need to do preventive treatment before these things seize. This post has been edited by njccmd2002: Sep 24, 2017 - 5:15 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 17, 2015 - 11:25 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
5238986B
 C3F734AA  D99E5715  this is most important grease. proper for brakes... 62E9C394  ADB9E1C5  then i proceded to organize the wiring to clear the hood... 5B2DC38D  and to modify the hood.. see the sensor. peekaboo... 8CBA697C 
This post has been edited by njccmd2002: Sep 25, 2017 - 12:48 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 17, 2015 - 11:27 PM
|
|
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
ooooo
-------------------- |
|
Nov 17, 2015 - 11:43 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
i need a solution for the oil cap, it cant be there.. cant close hood
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 18, 2015 - 12:42 AM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
A cap that's flat and is knobbed like a water spicket would work, I think that's how the one on the 7A was. Perhaps it or another like it would have the right threading.
-------------------- 2001 Miata LS 5-speed
|
|
Nov 18, 2015 - 4:56 PM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
Could try one off a 5s as well. It's not nearly as tall as that.
Worst case scenario, get some hood spacers where the hood bolts to the hinges and bump that b!tch up hahaha |
|
Nov 18, 2015 - 5:58 PM
|
|
|
Enthusiast Joined Sep 5, '04 From Quebec, Canada Currently Offline Reputation: 0 (0%) |
can you tell me what didn't fit with the FRS seats? They just wouldn't fit in place because of the shoulders?
|
|
Nov 18, 2015 - 6:48 PM
|
|
|
Enthusiast Joined Jul 12, '08 Currently Offline Reputation: 5 (100%) |
Ur a beast berto
-------------------- |
|
Nov 18, 2015 - 10:37 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
QUOTE (mkernz22 @ Nov 18, 2015 - 3:56 PM) Could try one off a 5s as well. It's not nearly as tall as that. Worst case scenario, get some hood spacers where the hood bolts to the hinges and bump that b!tch up hahaha i would require 1 inch spacers, which would make the hood sit so high, its ridiculous..... QUOTE (puma @ Nov 18, 2015 - 4:58 PM) can you tell me what didn't fit with the FRS seats? They just wouldn't fit in place because of the shoulders? extensive welding required, and modification, the angle of the seat cushion is not right. QUOTE (enderswift @ Nov 18, 2015 - 5:48 PM) Ur a beast berto lol.... shielded the shifter cables today... 3CC7C988  little teaser picture. and tomorrow. clearance of the oil pan. waiting for transmission oil and brake bleeding... for first test drive.... 61230404 
This post has been edited by njccmd2002: Sep 25, 2017 - 12:48 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 18, 2015 - 11:14 PM
|
|
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
getting there Noberto! it's gonna be one sweet ride.
-------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Nov 18, 2015 - 11:24 PM
|
|
|
Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
QUOTE (njccmd2002 @ Nov 18, 2015 - 10:37 PM) QUOTE (mkernz22 @ Nov 18, 2015 - 3:56 PM) Could try one off a 5s as well. It's not nearly as tall as that. Worst case scenario, get some hood spacers where the hood bolts to the hinges and bump that b!tch up hahaha i would require 1 inch spacers, which would make the hood sit so high, its ridiculous..... You were saying?  http://www.ebay.com/itm/BLACK-1-JDM-HOOD-V...8sw&vxp=mtr |
|
Nov 19, 2015 - 10:56 AM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
Lol thats funny. Never tought they would exist. But the hood would look funny. IMO. Ive tought about relocating the oil cap. Ive searched for slim caps. You name it. Someday an idea will pop...
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 19, 2015 - 12:57 PM
|
|
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
hood scoop.
-------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Nov 19, 2015 - 1:54 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
here are the clearance pics. from the front...
3BE49B84  and from the back.... 6A34191F  here is the cam sensor... 69AD28B4  so im going to get some spacers, and see what happens. This post has been edited by njccmd2002: Sep 25, 2017 - 1:09 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 19, 2015 - 2:35 PM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
Talk about tight clearances. Probably the best thing to do then would be to take some firm enough rubber that's oil resistant etc and make a plug/stopper.
-------------------- 2001 Miata LS 5-speed
|
|
Nov 19, 2015 - 3:37 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
I think hood spacers look retarded. And thse are only 3/4 inch and expensive at local harware store. Black chrome.
434A7E1D  03CD5CA1  And the end look i dont like FD1E97F3  BCEA1530  Happen to just find them at ace harware. Worst of all clearance. CB24F6AD  Was only improved marginally This post has been edited by njccmd2002: Sep 25, 2017 - 1:11 AM -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 19, 2015 - 3:43 PM
|
|
|
Enthusiast Joined Feb 2, '07 From Berlin, WI Currently Offline Reputation: 18 (100%) |
is it hitting the bracing of the hood or the top part of the hood?
I know it's not ideal, but would cutting into the bracing help? -------------------- *1997 Celica ST - 3SGE Greytop BEAMS *1977 Celica RA29 - Classic Cruiser *2005 Matrix AWD - dedded but still hanging around like a ghost 2019 Rav4 XLE Premium - Sports mode is fun. |
|
Nov 19, 2015 - 6:35 PM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
I was just about to say cut out the bracing then tack weld the bracing back down.
-------------------- 2001 Miata LS 5-speed
|
|
Nov 19, 2015 - 6:58 PM
|
|
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
Put up a pic of where it's hitting under the hood please sir.
and I know it's a tight fit but does the hood close with no cap ? or no close without damage ? This post has been edited by Batman722: Nov 19, 2015 - 6:59 PM -------------------- |
|
Nov 19, 2015 - 8:02 PM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
QUOTE (Batman722 @ Nov 19, 2015 - 5:58 PM) Put up a pic of where it's hitting under the hood please sir. and I know it's a tight fit but does the hood close with no cap ? or no close without damage ? The picture posted on the red view is with the hood closed. It closes with no cap. I already cut the bracing on the hood for the cam sensor. I have ordered a slim cap. When that gets here ill cut the space i need. I hate to cut the hood. The spacers are not growing on me... I have tought about relocating the oil filler in the future. I hate tight clearances..... -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Nov 19, 2015 - 9:23 PM
|
|
|
Enthusiast Joined Feb 23, '12 From Warrior, AL Currently Offline Reputation: 0 (0%) |
I rather cut and retack bracing than have to deal with hood spacers, at least when it's all said and done it really won't be glaringly obvious the bracing was cut in a few small spots.
-------------------- 2001 Miata LS 5-speed
|
 |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: May 15th, 2024 - 4:08 AM |