![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast Joined Jul 21, '18 From 31407 Currently Offline Reputation: 0 (0%) ![]() |
I am new to the site. As far as i can tell it is awesome and a lot of you members have some pretty sweet cars. I have always been a fan of 6th gen celicas. I am finally getting my own. It is a 95 gt with 3sgte swap already performed. Something i would have done anyway so it saves me some trouble. It is a 4th gen 3sgte. Is there anything i should look for to make sure was done properly? I plan on ripping it out and going through everything as well. Is there any necessary things i should do? Thanks in advance for all the help/advice.
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 12, '13 From Cleveland Currently Offline Reputation: 5 (100%) ![]() |
Just normal maintenance. If your pulling it out, redo all gaskets and seals. Double check all wiring. Check turbos to see if there is play, install a oil catch can. Then build, boost, break and repeat.
![]() |
![]() |
|
Enthusiast Joined Jul 21, '18 From 31407 Currently Offline Reputation: 0 (0%) ![]() |
Awesome. Thanks for the response. I plan on tearing it all down andredo everything. I have seen catch cans before but never known their use...
|
![]() |
|
Enthusiast Joined Jul 30, '20 From Vermont USA Currently Offline Reputation: 0 (0%) ![]() |
Just normal maintenance. If your pulling it out, redo all gaskets and seals. Double check all wiring. Check turbos to see if there is play, install a oil catch can. Then build, boost, break and repeat. ![]() how did you do the conversion? |
![]() ![]() |
Lo-Fi Version | Time is now: July 16th, 2025 - 2:48 PM |