6G Celicas Forums

Welcome Guest ( Log In | Register )

> New Brake Master Cylinder Needed??, diagnosis inside
post Apr 11, 2020 - 6:35 PM
+Quote Post
BonzaiCelica



Enthusiast
*****
Joined Apr 24, '08
From Orange County, CA
Currently Offline

Reputation: 33 (100%)




I replaced my brake master cylinder with a new Raybesto unit as well as a new proportioning valve (OEM). My problem is I will get air pockets 5 min into driving, pedal sinks momentarily and then brake feel is back to normal

While bleeding brakes, once i crack a caliper open, air bubbles do not come out till about 10 seconds later.

-Booster Operating check OK
-Booster Air Tightness check – engine off OK
-Booster Air Tightness underload OK
-No Leaks at Banjo Bolts
-Soft Lines OK
-No rust between shims and pads
-Caliper Pistons Seals not torn or leaking
-Caliper Pistons move freely when pressed inward with bleeder valve open


--------------------
For Sale Items:

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: May 14th, 2024 - 8:51 PM