6G Celicas Forums

Welcome Guest ( Log In | Register )

> Another 3s swap problem, driver's side axle pops out
post Aug 17, 2005 - 4:40 PM
+Quote Post
celica3sgte



Enthusiast
***
Joined Nov 12, '02
From Columbus, Ohio
Currently Offline

Reputation: 15 (100%)




For reference, I have a 2nd gen 3sgte with 92 mr2 lsd tranny. I'm using st185/mr2 hybrid axles. I finally put my rear motor mount in yesterday and the motor is sitting very solid now. The problem is, now my driver's side axle keeps popping out, and I lose all the tranny fluid. I know a couple of you had problems with these axles breaking cv joints on this setup. I definetly think that this axle setup is too short now. I always noticed that the outer cv joint is very stretched on both sides. I was doing some research and found out that the mr2 wheel base is 94.5 inches and the 94 celica wheelbase is 99.9 inches. I think this is the problem. Before it wasn't a problem b/c the motor was shaking with the axles and it wouldn't pop out, now with it being solid, the axle can easily shift out of the tranny. Any of your thoughts are welcome.

And one more thing. Does anyone know how long an st205 axle is. The compressed and extended lengths?

This post has been edited by celica3sgte: Aug 17, 2005 - 4:48 PM
 
Start new topic
Replies
post Aug 27, 2005 - 9:40 PM
+Quote Post
celica3sgte



Enthusiast
***
Joined Nov 12, '02
From Columbus, Ohio
Currently Offline

Reputation: 15 (100%)




Awesome work ems. I'll order that thing soon.

Posts in this topic
- celica3sgte   Another 3s swap problem   Aug 17, 2005 - 4:40 PM
- - lagos   not sure if this will help you or not, but the BGB...   Aug 17, 2005 - 4:59 PM
|- - Rjb23   QUOTE(lagos @ Aug 17, 2005 - 9:59 PM)not sure...   Aug 17, 2005 - 5:37 PM
- - lagos   QUOTE(Rjb23 @ Aug 17, 2005 - 5:37 PM)QUOTE(la...   Aug 17, 2005 - 5:39 PM
- - Rjb23   Yea my ST has the snap in kind too. So if the bol...   Aug 17, 2005 - 5:43 PM
- - defgeph   are you sure you're using the correct inners ?...   Aug 17, 2005 - 6:57 PM
- - celica3sgte   The only thing that bolts in are the outside of th...   Aug 17, 2005 - 8:27 PM
- - 97lestyousay   :   Aug 17, 2005 - 9:29 PM
- - Rjb23   I would check the pop ring that holds the axles in...   Aug 17, 2005 - 10:04 PM
- - celica3sgte   I'm using st isulators for front and rear that...   Aug 18, 2005 - 4:54 AM
- - celica3sgte   I just thought of something. The Mr2 tranny, v-6 ...   Aug 18, 2005 - 1:04 PM
- - Rjb23   I'm just wondering why your having problems wi...   Aug 18, 2005 - 5:31 PM
|- - sphinx   QUOTE(Rjb23 @ Aug 18, 2005 - 2:31 PM)I'm ...   Aug 19, 2005 - 1:32 PM
- - Rjb23   Didn't you have the 91 camry v6 axle shafts an...   Aug 18, 2005 - 7:31 PM
- - ems3s   Its got nothing to do with mounts, hubs or that ty...   Aug 18, 2005 - 7:43 PM
|- - Rjb23   QUOTE(ems3s @ Aug 19, 2005 - 12:43 AM)Its got...   Aug 18, 2005 - 7:50 PM
- - ems3s   Rjb23 i don't understand how you could be usin...   Aug 18, 2005 - 7:49 PM
- - ems3s   It happened to me when i was just trying to trial ...   Aug 18, 2005 - 8:07 PM
- - Rjb23   I may be doing that if mine don't fit right. I...   Aug 18, 2005 - 8:12 PM
- - ems3s   As long as the shaft diameter is right,the clip lo...   Aug 18, 2005 - 8:16 PM
- - Rjb23   I used all st185 mounts and the cross member. I di...   Aug 18, 2005 - 8:28 PM
- - ems3s   Are you sure? I tried a st185 x-member and the dam...   Aug 18, 2005 - 8:41 PM
- - Rjb23   Yeah I'm sure the engine is in my car now with...   Aug 18, 2005 - 9:28 PM
- - Rjb23   Are the solara inners the same I wonder?   Aug 20, 2005 - 12:11 AM
- - Rjb23   Ok I looked it up and the 92-96 camry wheel base i...   Aug 20, 2005 - 12:39 AM
- - Rjb23   I just got off the phone with the mechanic at XAT ...   Aug 20, 2005 - 11:53 AM
- - celica3sgte   The first time this happened, I pulled the axle ou...   Aug 20, 2005 - 2:29 PM
- - DG_Performance   steve, i got alltrac complete hubs & axles so ...   Aug 22, 2005 - 10:24 PM
- - celica3sgte   Thanks Dave, I'll give you a ring this weekend...   Aug 25, 2005 - 10:41 AM
- - sphinx   Yeah, i'm gonna have to make a spaces for them...   Aug 25, 2005 - 6:00 PM
- - Rjb23   My problem is I can't find mr2 axles. I've...   Aug 25, 2005 - 7:33 PM
- - ems3s   celica3sgte the custom mount for the rear that you...   Aug 25, 2005 - 8:10 PM
- - ZoomZoom   what year camry outers is that from. Im using a mr...   Aug 26, 2005 - 7:07 AM
- - celica3sgte   I believe it's the 92-95 camry outers, but the...   Aug 26, 2005 - 11:57 AM
- - ems3s   celica3sgte, I wish I could take some pics of the ...   Aug 26, 2005 - 7:22 PM
- - celica3sgte   Awesome work ems. I'll order that thing soon.   Aug 27, 2005 - 9:40 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: May 15th, 2024 - 9:00 AM