6G Celicas Forums

Hi,Im busy with building a turbo on my Celica T20 1.8 7AFE engine, i have all the parts already, but i dont know which Missing link valve i can use from Overboost.com, they only have mlv's from Ho...

so tonight i think i came to terms with my self... its either the BEAMS motor or im going to find a 205 front clip.... couple questions and i searched and couldnt find anything....1. is there anyone i...

I went to the dyno today to get a baseline to compare my upcoming modifications (new turbo kit). To make a long story short, my car jumped the rollers and roasted a tire after the first pull. The dy...

i was just wondering where you all get your intercooler piping from. i see ebay has all these stainless steel pipes, for like $200 a set. i dont care about a flashy engine bay at all, just someth...

aight, obviously u get more power out of the 3gste.....(ofcourse if u have a stock one versus a super modded 5fse then it has no chance, so dont bring that up)What kinda $$$ difference...

So im thumbing through some stuff on the net...and come across this:http://www.poweredbytoyota.com/ssfeturbo.htmlLong story short, it is only $2,500. And then u need to buy the intercooler, boo...

i got the water to air intercooler and i dont have anything but the intercooler and i am switching from air to air to water to air because i dont have a hood scoop for air to get to it. anyways what d...

http://www.fullthrottlespeed.com/items~Cc~...s~0~Tp~~Bc~.htmi found this product after seeing it installed on a local dsm. it takes your afm and converts it to a map signal for only 200$. problem...

If you need an exhaust for your car this is the man to see DG Performance. You have to drive to his house, but trust me its so worth it. I love it. I tell you nobody could have done a better job....

fuel perss reg does any one have one hooked up some 1 should have a how-to

When you all had your harnesses done, did you re-route the harness to exit on the timing belt side instead of the distributor side or did you just lengthen it and run it behind the intake manifold the...

This is for everyone on here.I don't get to be on here as much as I want to be but every time I do I find more post about turboing the 5s-fe and there being many arguments about it's power and...

Hey guy's, I've been searching for a while and I know that you're supposed to use a restrictor for the oil feed although I can't find exactly where to get one. Can anyone...

Alright, I do understand that if you turbocharge anything it is wise to beef up the internals.(duh) The reson for my post is to read your thoughts of a magazine article I read in this months HCI. The...

So im thumbing through some stuff on the net...and come across this:http://www.poweredbytoyota.com/ssfeturbo.htmlLong story short, it is only $2,500. And then u need to buy the intercooler, boost...

3SGTE Swap Checklist:Engine set - $2500Custom wiring harness from Phoenix Tuning - $350FMIC - $225FMIC Piping (4 45* bends, 5 90* bends, couplings and t-bolt clamps)- $300Auto/manu...

This may have been covered before but couldnt really find alot of info on a search... maybe I missed something and ifso sorry for the repost I'm looking for info on getting a CT26 rebuilt. I want...

After searching the forums and not finding anything on it, i was wondering if anyone knows of any means of supercharging a 7afe?

i was just wondering after turboing your 7a or 5s, just going to the gte, or mix and maching heads and bottoms and what not to get more power, did you notice anything with handeling? i mean with fwd w...

does anyone have or know where i can find the part number for the GT4 st205 engine mounts? diagrams would help too. Thank you.

I have an oil filter relocation kit because my manifold would otherwise hit the oil filter. The other day, after driving for about 20 minutes on the freeway i see a huge amount of smoke coming from my...

How long is the oil feed from your block to your turbo?mine is pretty long(around2.5') and I don't know if it should be shorter, and if not where did you route yours through?

Well, since my water pump and radiator have been replaced, and I got my car back from Christina/QMC, I have had this wild coolant leak.First time it happened was about 2 weeks ago. I drive the car abo...

ok...before anybody says anything i already searched and didnt quite find what Im looking for.What i wanted to know is, how did the guys at burien toyota get their 5sfe motor to run at an everyday 14p...

What you thoughts about 2nd gen 3sgte and 3gen 3sge with turbo(let say ct20b). Its not about the price I just want to know your opinions about it. Will 3rd 3sge turbo(without AFM and other crap that...

Hey guys and gals...i know this is a stupid question...but do all o' you know anyway of getting a good, cheap turbo for my car? - - - or anyway to give me a little more umph? - - - i'm not rea...

TO ALL 6 GEN GT OWNERS AUTO OR MANUAL I SPOKE WITH ONE OF THE ENGINEERS AT RIPP MODIFICATIONS HIS NAME WAS RAY. YES IT'S TRUE ABOUT THE SUPERCHARGER BEING DISCONTINUED...

Anyone have any results from this? Such as the motor mounts. Did the engine bend the wheels out. Handling Issues?And is it even worth it? Engine is like 2.5k Custom Mounts 1.5k Other 2k.So its like ge...

Hello,I was just wondering where I can get a good downpipe for doing my 3sgte swap. I've seen alot of crappy ones on ebay, but I want a quality one thats not too expensive. Can I order it from s...

Does anyone know if the 02 sensor wire goes straight to the ECU like the knock sensor wire does? Reason I'm asking is the wire to my O2 sensor is bad and I just want to run a wire straight from t...

I'm working on getting all the needed part for the 5sgte project and I just need to get the coolant lines and the acqure a MAPsensor. Could anyone who's done this give some more detail on how...

Arrived today. Conrod bolts - should keep things together at 8000rpm + Gary

ct 26

how would i flush and clean an stock intercooler. a air to water intercooler. any liquid specifically to use??? to clean out the actual filter in the intercooler and the radiator fluid holder?? any he...

Okay want to see some pics of completed 5sfte projects. I am mostly concerned about a few clearance issues with the way I wanna do some stuff, so lets see your pics.. hey its a chance to show off a li...

im not sure where or how the carrier bearing is hooked up or used! thanks!

ok so i started thinking about turboing my 1999 gt the other day and i looked at how i would run the intercooler piping and i noticed that there is not clear path to get the piping around the the radi...

hey guys, im making progress with my swap. i just need to get oil in it before i try starting her up. i just dont have the dipstick in. i found the hole where it goes, but i need a pic of where it...

Hey Guys, thanks for all the great responses about turboing my Celica...now I have another question...-do cold air intakes really help performance?...or do they just sound cool? (No pun intended:))......

Hi, i've established from my last posting that cold air intake are worth the money...but now, who makes them, and where can i get them? please get back to me fast b/c i need to buy it today!...

Does anyone know where i can find the intercooler and piping for the alltrac turbo setup on the 5sfe? Let me know. thanks

http://www.mr2oc.com/showthread.php?t=138999&page=1&pp=30For anyone interested in simplified IC routing for their 3SGTE this looks like the cheapest solution. According to the folks at mr2oc.com the 4...

I finally got my clip from japan yesterday and after overlooking everything with my friends...this doesnt seem like its going to be that hard of a job at all...i mean it will be a challenge but i cert...

Hi 6gc.net crowd....I have a 206K mile engine, and i'm wanting to install a turbo...my questions are:- -would it tear the existing engine up? (or cause any harm?) ...The car has been well cared f...

Intro: Well, I took my car to celicagurl152003 and had quite a bit of expense put into it. Throughout the work to my car, the intercooler "could not be installed" and I was told the car woul...

Ok, I'm getting a code 52 the knock sensor code, what should I check for? Besides that the wire is attached to the knock sensor?

hey guys... curious to know how u other 3sgte guys get around to getting an inspection sticker? i made the mistake of not getting my car inspected before the swap... bboy

now i was talking to celicast3sgte about these fake blowoff valves and i trust what celicast3sgte tells me but i just want more oppions on this subject. on ebay there are hundreds of the fake greddys...

located in the DP

Does any one know the part# for the "hose form hell". Need to get one.