Question about rims Options

[HaRv3sTeR]

I want Enkei RS5 17" rims with an locknuts kit...

Is the bolt pattern for our cars 5x100x114.3 or I must choose 5x100x112?
(I know they are 5x100, but I dont know what the 3rd number is)

also, what size are the bolt on our cars? (because I want a locknut kit that fits)

[ghostdog]

5 x 100 and 5 x 114.3 are two different bolt patterns

you'll want an offset between 35 and 43

as for the bolts. as far as I know they are universal


edit: I see what your trying to say.

like how it says "5/100 & 5/112" here:

http://www.1010tires.com/wheel.asp?wheelbr...&wheelmodel=RS5

that merely means both those lug patterns are present on the wheel
notice how the pictured wheel has 8 bolt holes rather than 4

[HaRv3sTeR]

check http://www.enkei.com/PerfSpecPAGES/rs5Specs.html

there's 2 different 5x100

[HaRv3sTeR]

from http://www.1010tires.com/wheel.asp?wheelbr...&wheelmodel=RS5

I think the one that my shop want to order me are: 17" x 7" 5/114.3 & 5/100 ...are those good?

also..when you click on the picture (to enlarge...you see 8 hole...just wondering if the lugs go in the tinny holes or in the extended hole

also...with that gold center cap (from picture)...how about I paint my calipers/hubs gold to match the caps? ? or would it be better stockish-gray like ive planned earlier?

This post has been edited by HaRv3sTeR: Apr 9, 2004 - 10:20 PM