Alarm Problems, I know its been posted a thousand times Options

[mjmsoccer]

Well I did a search but I couldn't find what I was looking for. I got a Crimestopper Super Rage CS-2100 RS . Well I tried to just wire in the keyless entry part and I used pali player's diagrams along with some from crimestopper.com and I got the door to unlock, but once they lock the siren starts making weird noises and it doesn't lock. I took the lock to the blue/black wire in the kick panel and the unlock to the solid green and solid blue from the same harness. The only other wires I ran were the power and the +12 volts for the siren. Do I need to install more wires or do I just have the wrong ones? Thanks

[mjmsoccer]

ok, so i wired up some more stuff and the locks work, but the unlock doesn't work, I have my unlock negative wire going to the green and the blue in the kick panel, what doesn't make sense is the green wire runs 12 volts without even hitting unlock, is this right?
thanks guys

[mjmsoccer]

ok nevermind i got everything figured out, including the remote start, i was missing some of the wires that were on other harness

[wind]

lesson learned.... read instructions first

[mjmsoccer]

haha man it didn't even come with a freaking wiring diagram, all it came with was a paper that said how to program the remotes. And I didn't have internet access at home so I was pretty much screwed. The problem was the guy who gave it to me had the diodes wired wrong.