 Door switch, as mentioned before but updated |
  |
 Mar 11, 2003 - 4:32 PM
|
 
|
 Enthusiast  Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%)  |
OK I had a thread goin about my alarm issue,, well long story short I have no power to my drivers side door switch now.. switched the diodesaround and passenger side still works but cannot get power to my drivers sid3e switch,, ahhh any ideas???
|
|
Mar 11, 2003 - 5:54 PM
|
|
 Enthusiast Joined Sep 5, '02 From Phoenix, AZ Currently Offline Reputation: 0 (0%) |
Did you install the alarm yourself?
|
|
Mar 11, 2003 - 8:16 PM
|
|
|
Enthusiast Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%) |
yup sure did.. thats not a problem done lots of em just had an issue with the lighted entry and accidently (not paying attention= talking) ****ed up and shorted out something.. now have no power to my door switch.. the wires are confusing on this too,, book says red/white,, at kick pannel it is red/white,, at switch red/white but at the connection just indside the rear pannel it is red/yellow,, can't find a red/yellow leading to the kick ,, have to pull the whole cluster from the door switch ahead out and chase it down,, was hopeing some one else knew so i didn't have to....
|
|
Mar 11, 2003 - 8:21 PM
|
|
|
Enthusiast Joined Dec 19, '02 From West of Atlanta Currently Offline Reputation: 1 (100%) |
what kind of connections are you using... if you used butts any chance you caught some insulation and have a bad connection
|
|
Mar 11, 2003 - 8:31 PM
|
|
|
Enthusiast Joined Sep 30, '02 From NS Can Currently Offline Reputation: 0 (0%) |
NO there is no connection I made that should affect it,, I disconnected and soildered back up still nothing....
|
|
Mar 11, 2003 - 9:02 PM
|
|
|
Enthusiast Joined Dec 19, '02 From West of Atlanta Currently Offline Reputation: 1 (100%) |
t96f... check your pm
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 18th, 2025 - 5:24 AM |