![]() |
![]() ![]() |
![]() |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
just though you guys might be interested in knowing that the 3sge transmission will work in the 6th gen with a 3sgte bolted on and its alot stronger than the GT transmission.. I stumbled across that a little while ago and called toysport to confirm it and they told me that's the transmission they now use for there swaps.
-------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From Maryland Currently Offline Reputation: 8 (100%) ![]() |
So would you say that you could also use the 3sge tranny on a built 5sfe?
-Bryan- -------------------- Member of Team 5sfTe
|
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
thats a good question.. I dont see why not but I also dont really see the purpose of doing that as you would have to dump thousands into the 5sfe to require a stronger tranny
-------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Nov 6, '02 From Chicago, IL Currently Offline Reputation: 0 (0%) ![]() |
So you think that it actually matters which transmision you are going with, hmmm, I don't think so, why ??? I'll let you know why??? "Jspec/US-Spec MR-2 Trans" vs "US-spec GT Trans" What do you think, whoever had that turboed MR-2, was driving the car SLOW, hell no, anyone with a turboed car would beat the living crap out of it. So you do get better transmision with MR-2 overall but the condition of the MR-2 trans versus pure stock US-spec GT cannot be compared... ***** so if you compare pros and cons it kind of equalls out ***** |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Oct 12, '02 From New Jersey Currently Offline Reputation: 0 (0%) ![]() |
all i know is that the tranny from the AT200 is crap, well atleast that's what has been said on this board..
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From Maryland Currently Offline Reputation: 8 (100%) ![]() |
The GT tranny will max out at about 250hp at the most. However the duce turbo and solara v6 tranny should hold around 350-400 hp with out a problem so wether or not the trannys took a beating or not they should be able to take the abuse. The 3sge tranny I assume is built with the same standers as the 3sgte tranny (excluding the awd) if so that means that you can push the tranny a little harder.
NEway I am planning on getting my 5sfTe project going so I should be at 200-220 hp by summer so we'll see what the gt tranny can handle then ![]() -Bryan- -------------------- Member of Team 5sfTe
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Sep 5, '02 From Phoenix, AZ Currently Offline Reputation: 0 (0%) ![]() |
What kind of tranny do they use on the 700hp+ on the 3sgte project cars?
I know it ain't the original tranny. |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 26, '02 From Alabama Currently Offline Reputation: 2 (100%) ![]() |
I've heard that the AT200 can handle up to about 200. That right?
|
![]() |
|
||
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
I dont know about u but I think after spending all of the money to purchase a 3sgte and swap it in and all that the transmission choice would be pretty important... lets pretend for a minute that the transmission isnt one of the MOST IMPORTANT parts of the drive train... bolting up a transmission that is rated at 200-250hp isnt gonna last very long on an engine that ranges from 200hp up wards to 350hp on some versions - thats like makin a spacestation outta gumdrops and toothpicks - only one STUPID muthafuker is gonna think that it has a chance.. who know maybe u just like burnin up trannys... or maybe you've neverdone it and dont have a clue how much of a pain it is to replace/rebuild a transmission. Point is I was just offering up another option on the 3sgte swap and it a pretty good option at that -------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
||
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 30, '02 From Michigan Currently Offline Reputation: 0 (0%) ![]() |
how hard would it be to source a 3sge tranny though?
This post has been edited by K2_Celica: Mar 14, 2003 - 12:50 AM -------------------- ![]() Believer, you'll leave her, in leaving them all No but I don't buy it Like anything you do, as anyone you are Cause I'm... Ten Speed, of God's Blood & Burial |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
u can get them form the same kinda places that have 3sgte's
-------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Sep 5, '02 From Phoenix, AZ Currently Offline Reputation: 0 (0%) ![]() |
If you can find a 3sge front clip, odds are that you can get the tranny with it also. Along with the axles and whatnot that is also needed for a swap.
|
![]() |
|
||
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) ![]() |
where talkin about using the 3sge transmission with the 3sgte engine.. of corse the 3sge clip will come with the tranny,ecu and harness -------------------- ![]() 99 project version 3.0.. hello SEMA 2010 =) |
||
![]() ![]() |
Lo-Fi Version | Time is now: July 26th, 2025 - 12:38 AM |