FS: turbo parts Options

[DoodieHead]

Well, i wrecked the celica about 2 weeks ago and am trying to get some of the money back for all the parts. I can't get the fuel pump and injectors since they are on the car and front mount was damaged, then stolen from car when it was out of town at towing service. But I do have the following:

JDM 3SGTE CT-26 with ~40k miles -- Very little shaft play if any $250
3SGTE Exhaust Manifold $75
3SGTE Downpipe & Blitz Diffuser $90
3SGTE 2 Bar Map Sensor(Turbo Pressure Sensor) $55
Greddy Type-S Blowoff Valve(Brand New) $200 -that's with flange
Flange for blowoff valve is welded on 2.5" ID straight pipe about 10" long
Manual Boost Controller (Brand New) $15
Oil line and gasket(welded on fitting and hose for return line) and Coolant lines (Brand New from Toyota) $55 hose and t fittings included
Hose and t fittings for the oil supply where oil sending unit is on the head(british thread)
Six 3" Length and 2.5" Diameter Silicone Hoses W/ 12 hose clamps $30
Autometer Air/Fuel Ratio 2 1/16" Gauge (used for couple weeks) $30

Shipping is extra. All these parts are ready to go on the car when you have 3sgte oil pan or tap your oil pan. Please keep in mind it is strongly suggested that you get fuel components for your setup such as pump, injectors, and something to set fuel curve(S-AFC). You will also need spark plugs with gap of .032 and bigger wires. I do not have pictures at current time but will try to get them up within the week..im pretty busy right now trying to get insurance taken care of and college starting back up...If you have any questions about installing any of this, just give me a shout.