Jul 20, 2016 - 5:09 AM
|
|
|
Enthusiast Joined Feb 1, '14 From Phoenix Currently Offline Reputation: 0 (0%) |
Have a 94 ST Manual Transmission. Rebuilt 7A-FE engine. CEL pn and throwing code 071. EGR valve doesn't hold vacuum when I apply vacuum to see if engine stalls.
Looks like I need to replace the EGR valve and possibly EGR modulator. I'm wondering if either of these are cross compatible with other models? For some reason both of these are very expensive for this engine and cheaper for other engines. For example, I've only been able to find used EGR valves for the automatic transmission, not the manual transmission. If I could use the one for the automatic, I can save a bunch of dough. Are these interchangeable even though they have different part numbers? Likewise for the modulator. I've found aftermarket ones on Ebay very cheap for the GT 5S-FE engine. The ones listed for the ST 7A-FE engine are much more expensive. Anyone know if there's any difference between these or if they're interchangeable? Thanks for any guidance on this. |
blickman Cross Compatibility of EGR Components? Jul 20, 2016 - 5:09 AM
blickman Bump.
Anyone have any thoughts on this? Aug 9, 2016 - 7:20 PM
Bitter I like to use RockAuto to cross check parts interc... Aug 9, 2016 - 8:39 PM
Box I had a 7A-FE and used one of the Densos on eBay t... Aug 9, 2016 - 9:09 PM
blickman QUOTE (Box @ Aug 9, 2016 - 7:09 PM) ... Aug 9, 2016 - 10:24 PM
blickman Thanks for the response. Rock Auto gives 4 differ... Aug 9, 2016 - 9:28 PM
Box Found it: http://www.ebay.com/itm/EGR-Valve-TOYOTA... Aug 10, 2016 - 2:54 PM
Batman722 IIRC if you put the 2 wire that go to the sensor i... Aug 10, 2016 - 10:29 PM
Box QUOTE (Batman722 @ Aug 10, 2016 - 10... Aug 11, 2016 - 12:15 AM![]() ![]() |
| Lo-Fi Version | Time is now: December 14th, 2025 - 4:29 PM |