6G Celicas Forums

Welcome Guest ( Log In | Register )

> What to do!!!, after 8 months the 3s is not working!
What to do!
You cannot see the results of the poll until you have voted. Please login and cast your vote to see the results of this poll.
Total Votes: 17
Guests cannot vote 
post Nov 15, 2004 - 5:04 PM
+Quote Post
Chrobis



Enthusiast
****
Joined Apr 15, '03
From San Jose, CA, USA
Currently Offline

Reputation: 1 (100%)




Well, after 8 months of not driving over 4k rpm, and it constantly fuel cutting im, to say the least, agravated! I thought the shop I had the swap done at was compitent enough to service problems, but i have had this problem since i drove it out the shop in April. The car cant go over 80 on the freeway, and it cant be left in gear over 2k rpm, so that means to drive at 80 in 5th I have to accelerate for like 5 seconds, it cuts, i put the clutch in and it go's to idle and I can then accelerate once again.

At this time my mechanic seems to be just spitting out parts for me to replace that might fix the problem, and frankly I want to add parts to the car with the money I'm spending, not just pump into stuff I don't need. At this time he wants to try the knock sensor, which I'm not tottaly sure about...

I went over to my local dealer and they said they would be able to run a diagnostic for like $250+ which would suck because that is money that just disapears.

So people, what do I do!?

Pump money into parts that may fix the car, or just drop the money to then find out the exact problem and then drop the money to fix that?

This post has been edited by Chrobis: Nov 15, 2004 - 5:08 PM

Posts in this topic
- Chrobis   What to do!!!   Nov 15, 2004 - 5:04 PM
- - thedevilmaycrie   id say do to autozone and "check out" a ...   Nov 15, 2004 - 5:07 PM
- - Chrobis   Well toyota wouldn't just hook it up to a mach...   Nov 15, 2004 - 5:09 PM
- - Manta5x   a sensor in my car went bad and kept causing my fu...   Nov 15, 2004 - 5:20 PM
- - 97sccelica   no scoop to cool the stock 3s TMIC? do you have a...   Nov 15, 2004 - 5:21 PM
|- - Chrobis   QUOTE(97sccelica @ Nov 15, 2004 - 2:21 PM)no ...   Nov 15, 2004 - 6:30 PM
- - Jdog1385   yea, you went this far, so you might as well finis...   Nov 15, 2004 - 5:23 PM
- - DamDirtyApes   yeah id say have a dealer look at it   Nov 15, 2004 - 5:25 PM
- - Coomer   I'd say talk to Bryan or Ryu or one of those g...   Nov 15, 2004 - 5:30 PM
- - thedevilmaycrie   yeah coomer is right lol i tell you what call me a...   Nov 15, 2004 - 5:37 PM
- - Doge   Yeah heat soak isnt a problem... trust me i know...   Nov 15, 2004 - 6:36 PM
- - Chrobis   exactly, just the compressed air going in wont be ...   Nov 15, 2004 - 6:38 PM
- - boosted_K2   take it to EL prototypes of they arent too far fro...   Nov 15, 2004 - 6:47 PM
- - lagos   how about trying to fix it yourself and learning a...   Nov 15, 2004 - 7:11 PM
- - Chrobis   no offense to you lagos, but I know more about my ...   Nov 15, 2004 - 7:25 PM
- - Chrobis   and yes E.L. prototypes is like 400 miles away, or...   Nov 15, 2004 - 7:30 PM
- - lagos   excuse me for trying to help! you asked...sh...   Nov 15, 2004 - 9:09 PM
- - DamDirtyApes   what are u gettin on lago's ass for dude, hes ...   Nov 15, 2004 - 9:52 PM
- - WannabeGT4   chrobis, if for 8 months you haven't been able...   Nov 15, 2004 - 9:53 PM
- - boosted_K2   limp mode doesnt just open the wastegate, limp mod...   Nov 15, 2004 - 9:58 PM
- - thedevilmaycrie   i talked to him it sounds like complete boost cut ...   Nov 16, 2004 - 1:12 AM
- - boosted_K2   capping off the T-VSV will just put it into full t...   Nov 16, 2004 - 1:15 AM
- - Chrobis   well, this is the wierdiest part. That I actually ...   Nov 16, 2004 - 12:54 PM
- - Chrobis   Also, just to let everyone know there are like 5-1...   Nov 16, 2004 - 12:58 PM
- - lagos   if your ignitor is from a 92 and your ecu is a 90-...   Nov 16, 2004 - 1:36 PM
- - Chrobis   Well, I have (or can borrow) a multimeter, but I d...   Nov 16, 2004 - 2:17 PM
- - lagos   borrow a multimeter and PM me when u have it. then...   Nov 16, 2004 - 6:22 PM
- - madmods   Man your scaring me from doing the switch myself. ...   Nov 17, 2004 - 2:11 AM
- - Chrobis   Dont be scared of doing the swap, just either do i...   Nov 17, 2004 - 1:56 PM


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: September 7th, 2025 - 9:10 AM