 Couple engine questions, bore and stroke |
  |
 Jan 22, 2005 - 6:30 PM
|
 
|
|
Enthusiast  Joined Apr 22, '04 From illinois Currently Offline Reputation: 0 (0%)  |
The bore and stroke of my 2.2 L 5s-fe engine is 3.43 x 3.58
so obviosly it isn't near square bore. It is possible, and if it's not. Then how big can we get without having over heating issues? ANY help is appreciated, lets here it 6GC --------------------  The most important lesson I learned from Karate-Dō Kyōshan – “You can not be what you do not believe you are” |
|
Jan 24, 2005 - 6:30 PM
|
|
|
Enthusiast Joined Apr 22, '04 From illinois Currently Offline Reputation: 0 (0%) |
BUMP danget
-------------------- The most important lesson I learned from Karate-Dō Kyōshan – “You can not be what you do not believe you are” |
|
Jan 24, 2005 - 11:35 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
Not really big. Because of the block design (solid cast), the biggest spec bore is probably only a few mm larger than the stock, which is roughly 87.5mm if I remember correctly. I'd say you wouldn't be able to get more than 89mm overbore...
-------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: June 7th, 2025 - 8:57 PM |