5S block 3sgte head Options

[62-1celi]

if im goin to use the 5sfe block and the 3sgte head and it is goin to be for boost what computer should i use

[nik]

if im goin to use the 5sfe block and the 3sgte head  and it is goin to be for boost what computer should i use
[right][snapback]265100[/snapback][/right]

i think itchy was talking about this a while back i'll find the link but in short you want the 3sgte head and wiring harness ecu pretty much doing a the full swap minus the block but i dont know for sure if the coolent passages line up


update here it is
http://www.6gc.net/forums/index.php?showtopic=18104&st=20

This post has been edited by nik: Apr 1, 2005 - 10:18 AM

[presure2]

really, the best way would be standalone.

[OrbitalGT95]

really, the best way would be standalone.
[right][snapback]265111[/snapback][/right]

"and a standalone managemt system...not a bad way to spend ten thousand dollars"

sry i couldn't help myself
"yo get enough NOS in dar to blow himself up"

[1bwilson]

really, the best way would be standalone.
[right][snapback]265111[/snapback][/right]

"and a standalone managemt system...not a bad way to spend ten thousand dollars"

sry i couldn't help myself
"yo get enough NOS in dar to blow himself up"
[right][snapback]265223[/snapback][/right]

Thanks for posting NOTHING that has anything to do with this thread.


A standalone is going to help get rid of a HUGE headache if you try this.

[presure2]

as for which standalone, i'd recommend the hydra nemisis, proven to work well for the mr2 guys who do the strokers all the time.

[thedevilmaycrie]

i personally prefer haltechs...

-DMC