![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 25, '02 From Pittsburgh/Clairton, PA Currently Offline Reputation: 1 (100%) ![]() |
Trying to figure our what parts i can use from the MR2 or the ST185(since they are sometimes cheaper)
Here's the list from Sev's posts that i have questiones about the pedals not as much as the cylinders + lines, but the rest yea... -Shifter -Shift Cables -Clutch Master cylinder -Slave cylinder -Clutch metal fluid lines -Rubber clutch line -Clutch pedal assembly -Manual brake pedal (just the pedal because John told me you dont need the whole assembly) -Manual Transmission Drivers Side Mount -Starter Relay for Manual -2 bolts for Trans- 12 by 1.25 (1 is 65mm other is 75mm) -------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: July 18th, 2025 - 4:45 PM |