 Swap help |
 Sep 6, 2005 - 7:29 PM
|
 
|
 Enthusiast  Joined Feb 8, '04 From KY Currently Offline Reputation: 0 (0%)  |
Ok, so the guy who was doing my swap totally messed up the wiring I'm assuming. I had DG do the wiring for him, and the car did start and idle. But he took the engine out and when he put it back in now won't start. Basically now he is passing the car back to me incomplete and not running, because he can't figure it out.
The car turns over just won't fire up. Any ideas at what I should start checking first? And let this be a lesson to everyone if you have the know how just do the swap yourself and save yourself the headache! |
Posts in this topic
Rjb23 Swap help Sep 6, 2005 - 7:29 PM
Dr_Tweak Start with the obvious: fuel pressure and spark. Y... Sep 6, 2005 - 10:38 PM defgeph as noted above ..... and also check to see if ever... Sep 7, 2005 - 12:21 AM Rjb23 Whats the best way to test for fuel pressure and s... Sep 7, 2005 - 9:33 PM
Dr_Tweak QUOTE(Rjb23 @ Sep 8, 2005 - 2:33 AM)Whats the... Sep 10, 2005 - 12:19 AM lagos QUOTETake a 17mm socket and crack open the connect... Sep 10, 2005 - 12:42 AM Dr_Tweak Ah comon, what's the fun in THAT??? Sep 10, 2005 - 2:58 AM Rjb23 Thanks Dr. Tweak I get my car back today so I will... Sep 10, 2005 - 10:41 AM Dr_Tweak QUOTE(Rjb23 @ Sep 10, 2005 - 3:41 PM)
I have ... Sep 10, 2005 - 10:39 PM DG_Performance check all plugs connections/loose connections, gro... Sep 10, 2005 - 11:47 AM Rjb23 Thanks, Dg I'll probably be calling you tommor... Sep 10, 2005 - 1:12 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 6th, 2025 - 6:44 PM |