Tein SuperStreet Damper, possible missing part? Options

[Silver94CelicaOw...]

That should be fixed in an alignment as far as I know. I would think that it could be caused by improper toe in/out, where one wheel may be angled in more than the other causing you, the driver, to have to compensate for it with the steering wheel.

If you describe it to your shop first before an alignment and they still dont fix it, I would go someplace else.

[playr158]

your alignment is wat makes your wheels stay straight in relation to the phsyical car (not the wheel)

so if you steering wheel has no been centered on the steering rack you could have perfect alignment at steering rack center, but you wheel could be turned to the right a quarter turn.....(make sense?)

the steering wheel is attached to the steering rack at a joint, the wheels must be centered aka 0* and your steering wheel must be at center aka 0* then the wheel and rack must be attached insuring both are at 0*

[celicarus]

thanks for your replies - i will have it looked at next week - as it posses no problem for me - other than looking weird .

[nik]

hey you know how the 7th gens have a pillow mount can you use that on ours?

[playr158]

are you asking if we can use the exact same part from the 7th gen onto our cars?

[nik]

yep i want to know if any has actess to 7gen to take a pic and some measurements