as I had too many requests about them, here they are again...Custom Lows... Options

[elvasoshexai]

if the set costs near the JDM lows but it comes with HID projectors i think it will be worth it

This post has been edited by elvasoshexai: Nov 1, 2005 - 6:30 PM

[doGGy]

HID's will be + 220$ Original Hella HID's not some cheap braded stuff...

if the set costs near the JDM lows but it comes with HID projectors i think it will be worth it
[right][snapback]351587[/snapback][/right]

[LewFX]

how hard is it to clear the oem lense?

[elvasoshexai]

ok. so lemme get this straight...

if you were to sell this kit the original would come with halogen projectors.

If we wanted one of your kits with HID projectors instead of halogen it'll be about 220 on top of whatever it cost originally? is that +220 EACH or +220 for the set?

would it come with ballasts harnesses/connectors etc?

HID's will be + 220$ Original Hella HID's not some cheap braded stuff...

if the set costs near the JDM lows but it comes with HID projectors i think it will be worth it
[right][snapback]351587[/snapback][/right]

[right][snapback]351589[/snapback][/right]

[elvasoshexai]

takes several several hours to like... an entire day depending on how fast you work:
DIY Clear Headlamps Guide

how hard is it to clear the oem lense?
[right][snapback]351594[/snapback][/right]

[dustin15brown]

takes several several hours to like... an entire day depending on how fast you work:
DIY Clear Headlamps Guide

how hard is it to clear the oem lense?
[right][snapback]351594[/snapback][/right]

[right][snapback]351604[/snapback][/right]

you realize if you try this you are a dumbass..... This is GLASS not PLASTIC.... that is why it is soo expensive.... You need a lil more than just some sandpaper. and the HID's will be the kit cost + 220 total.... so 220 combined for both sides

[elvasoshexai]

ah. no wonder. since i asked this in another thread and no1 ever answered so i never found out if it was glass or plastic.... but i thought only plastic headlamps would turn yellow? hm. o well

you realize if you try this you are a dumbass..... This is GLASS not PLASTIC.... that is why it is soo expensive.... You need a lil more than just some sandpaper.

This post has been edited by elvasoshexai: Nov 1, 2005 - 9:40 PM

[creis]

^ that finished pproduct does not look good, or "crystal clear" your better off just putting some tinfoil over the thing and forming some plexy glass to the right shape.

[zachattack15]

What would you do to clear the lenses? Sand blasting?

------------------------

[Valo666]

i dont care how long it would take/how much it would cost, but ME WANT THESE!!!! Romas, PLEASSSSEEEEEE post a FS topic when ur close 2 gettin these started in mass production. I would think coustom headlights would b cooler/more rare than JDM's and also IMO i think these look hotter.

[Jdog1385]

i dont want to sound like an ass here but they're just headlights...who cares what they look like. i want to see whats under the hood,

[doGGy]

i dont want to sound like an ass here but they're just headlights...who cares what they look like.  i want to see whats under the hood, 
[right][snapback]352298[/snapback][/right]

Period.

True Gearhead words

[FSX_Celica94GT]

if you look at a picture of a celi w/ stock headlights and then w/ the projectors/DCW lights, it makes it so much more attractive than it already is.

[95CelicaST]

I don't know if it is possible, but if these went into production as a DIY kit, people could theoretically paint the black housing to match their Celi (Red, Yellow, Silver). That would look nice.

[jayi12-15psi]

like this?

[95CelicaST]

yeah, like the Ferarri 360 Modena

[jayi12-15psi]

sorry, I don't know where that went, I suck at the internet.

[CelicaSTX02]

wOW, I REALLY LIKE THAT A LOT