confused...... BTM wiring, sorry manny Options

[urbandork]

ok so i looked at that how to and found that the diagram does not match up with what it says to do with the black wire coming out of the coil. It says it will be connected to the orange wire from the btm but it shows it being connected to the read.

Manny has typed, in a rush as he had to run, that...
PRESURE2: the white wire coming from the coil gets cut
PRESURE2: the coil side of the wire goes to the orange from the BTM
PRESURE2: the harness side goes to black from the tach adapter
PRESURE2: the white wire is white with a blue stripe
PRESURE2: then the red from both units tap into the black wwith ornage stripe.

but what about the white one from the btm and the gray one from the tach adapter?

I know manny was in a rush but perhaps later someone can revize the how to or help me out. id hate to hook the rong wire up to the rong place lol.

thanks in advance and no stress on time.