HELP ME PLEASE!, 3sgte mount question Options

[eggman40]

Hello All, I just recieved the gt-4 mounts today, however my connect. did not send me the brackets. I was wondering if i could use the brackets from the american GT in order to get it to work. I have a 2nd gen 3s using a 92 mr2 turbo tranny. Please let me know as soon as possible. Thank you

[Defgeph]

rear gt mount bracket wont work, not sure about the front.

[Bigmeanbulldog55]

I think you'll at least need the trans mount. Lagos had a problem with using the 5s mount a while back. As for the rest of them, I'm not sure.

[eggman40]

Is the tranny bracket the same for the st205 as it is for the st204?

[Defgeph]

no its different, all the 205 mounts and bracket are different fromthe 204

[Rjb23]

I am using gt front and passenger, mr2 driverside, and gt/st rear insulator with a custom bracket, works great, no trouble so far.

[eggman40]

bump anyone know if there is a specific order in which the 3s is bolted up? as in which mount gets bolted first, front, back, pass, driver?

[Defgeph]

driver, pass, back, and front. Then tighten everything up once they are all installed.

DEF

[eggman40]

driver, pass, back, and front. Then tighten everything up once they are all installed.

DEF

Thank you much

[Rjb23]

I went drivers, front, pass, rear. It really doesn't matter what order it goes in, if you are drilling the passenger side mount do that one last.

[eggman40]

Just out of curiosity, has anyone tried using a gt4 rear mount with an st185 bracket? Since im still waiting on the gt4 brackets i wanted to experiment. I will try st185 mounts+bracket on the drivers side, gt4 front mount and st185 bracket, and oviously the GT pass mount. If anyone has tried this and it does not work please spare me the time and stop me now thanks. Bump

This post has been edited by eggman40: Dec 20, 2005 - 6:17 PM

[Rjb23]

The front mount and bracket dont work, the rear mount and bracket won't work unless you do some cutting and welding, the driverside mount and bracket work but you have to grind the mount to fit in the frame, the passenger side mount and bracket dont work.

[eggman40]

i tried fitment today, i was able to bolt the rear pass and driver with no problem. The front bracket however falls short an inch. Maybe a custom is in order.

[zipstrips]

from what i was told the GT4 mounts do not work with the swap. i eye'd up my 5th gen GT4 mounts that came with the swap, there close but def not right. get the GT mounts and brackets. bolts right up like OEM.

[Defgeph]

from what i was told the GT4 mounts do not work with the swap. i eye'd up my 5th gen GT4 mounts that came with the swap, there close but def not right. get the GT mounts and brackets. bolts right up like OEM.

He has an mr2 tranny GT4's dont work witht he 5sfe tranny