I need answers please., i did my research. Options

[sugarfree]

I have a 96GT automatic. Im wanting to swap over to a 3sgte so that means i will have to go with a manual transmission. Im goin to go with a e153. And im going to use mr2 inner axels with V6 camry outers. So im going to order a MR2 clip. So far i did some research on it for a while using this forum. I will need mounts from an St205 because i dont want to weld. Are these mounts for the transmission or the motor? I have the part numbers on that, but if i get all ST205 mounts, does that mean i get rid of the GT mounts? Supersprynt said i will need an alternator bracket and shifter cables from the ST185 right? On the shifter cables i thought i could use GT shifter cables. Well here is all the part numbers and parts i need for this swap, is there anything else that i am missing?


12361-74340.......... Insulator.......... $47.10
12371-74440.......... Insulator.......... $88.00
12372-74500.......... Insulator.......... $109.00

12311-74160.......... Bracket, EN.......... $40.00
12321-74310.......... Bracket, EN.......... $26.00
12325-74230.......... Bracket, EN.......... $53.00

33820-2B350.......... Shift Cables.......... $341.00

I ordered these through Champion Toyota and were all a special order from Japan. Those are the list prices for those items.

(713)943-7010 Direct Parts Line

TRANSMISSION SWAP:
-Shifter
-Clutch Master cylinder
-Slave cylinder
-Clutch metal fluid lines
-Rubber clutch line
-Clutch pedal assembly
-Manual brake pedal (just the pedal because John told me you dont need the whole assembly)
-Manual Transmission Drivers Side Mount
-Starter Relay for Manual
-2 bolts for Trans- 12 by 1.25 (1 is 65mm other is 75mm)

Can someone confirm me?