REALLY serious about doing a 5sgte, with a GE head. no gte. Options

[x_itchy_b_x]

i have found a head thanks to a memeber, im trying to convince my dad into helping with the project. alright so im brainstorming for the 5sgte. since i can bolt the turbo-manifold directly on theres no problem there. but what about the intake manifold. it has a different bolt pattern if what i heard it right. so id need a GE intake manifold. or aftermarket intake for a 3sge. now the 5sfe uses a maf sensor would the 3sge manifold use the same type? anyone have more information on this. also on the GE head were would i tap it for oil? or does it use the same location and sensor as the 5sfe?

Also. il be running out of fuel with the amount of boost i want to run. the 7mgte injectors 440cc will fit but the ohms are wrong, for a coil pack is it as simply as sondering a resistor on one of the injector harness leads? if so thats the next step.

This post has been edited by x_itchy_b_x: Sep 15, 2004 - 10:10 PM