5sfte clutch, wha should i use Options

[urbandork]

just for the simplicity of it id like to stay with the stock gt set up and try to upgrade with a heavier duty clutch assembly

will this do for a 5sfte running 10ish psi

http://cgi.ebay.com/ebaymotors/F1-RACING-S...sspagenameZWDVW

"
F1 RACING STAGE 2 with Carbon Kevlar Steel-Back disc clutch kit is the perfect set up for Toyota Celica / MR-2 / Camry (2.2L 4cy) with upto 253 HP and 242 ft/lbs of torque. F1 RACING STAGE 2 clutch kit comes with Carbon Kevlar Steel-Back Facing disc that are resistant to slippage and burst. The discs have high capacity 6 sprung center dampers to reduce the drive train shock and impact. Increased clamp loads give the necessary capacity to handle modified engines and the pedal efforts will be slightly higher due to the higher clamp loads. All F1 RACING clutches require 500 mile break-in periods. Our picture below shows the ACTUAL item.

RETAIL PRICE: $ 325

Horsepower Rating: 253 HP at the crank / Torque Capacity: 242 ft/lbs


This complete racing clutch kit includes:


* F1 RACING Stage 2 heavy-duty Pressure Plate

* F1 RACING Stage 2 Carbon Kevlar Disc

* Release Bearing

* Alignment Tool

Part Number: F1-56130R1-12
"