Jan 18, 2006 - 9:34 AM
|
|
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jan 28, '05 From Redondo Beach, CA Currently Offline Reputation: 86 (100%) |
when im backing out of my carport, slight downhill, and turn out of it, i brake then go into drive and once i release the brake and car moves forward theres a klunking noise, to me it sounds like it comes from the rear...then as i drive forward and brake again, the brakes squeel. could that be the strut bearing? could it be that sway bar bushing, could it be a caliper, could it be because i have no shims on right now..any other ideas?
shims will go on today, will grease strut bearings too well, turns out a blown right front strut...accidently striped a sway link end too. This post has been edited by LewFX: Jan 18, 2006 - 7:14 PM -------------------- ![]() |
LewFX Thoughts on this noise Jan 18, 2006 - 9:34 AM
presure2 well, if you know you have no shims in the rear..(... Jan 29, 2006 - 8:23 AM
LewFX i put shims on the rear but once i put my stock st... Jan 29, 2006 - 2:47 PM![]() ![]() |
| Lo-Fi Version | Time is now: November 18th, 2025 - 3:31 PM |