Need Help! Carbon Hood wont clear top mount, intercooler Options

[eggman40]

I have an at200 chasis, i just put in the 3sgte in and i test fitted the hood to see if it would clear and it wont. Any suggestions? and no, no front mount, i cant afford it yet. the hood is a VIS carbon fiber c-one replica.(with the top vent) thanks.

[Defgeph]

How much different is the underside of the VIS hood ? I can fit a W/A intercooler under the hood.. Could you take some pics ?
Are you sure its mounted correctly ? (engine and hood)

[Dr_Tweak]

Chainsaw.

[eggman40]

How much different is the underside of the VIS hood ? I can fit a W/A intercooler under the hood.. Could you take some pics ?
Are you sure its mounted correctly ? (engine and hood)

the engine is mounted correctly, at first the hook used to lift the engine was bent too hight and it would keept the hood from closing, but i was able to bend it back. Now when i put the top mount on it still wont close. Im pretty sure its on correctly because all of its screws match up with the correct holes. Ill try to get pics in tomorrow.

[Defgeph]

How much different is the underside of the VIS hood ? I can fit a W/A intercooler under the hood.. Could you take some pics ?
Are you sure its mounted correctly ? (engine and hood)

the engine is mounted correctly, at first the hook used to lift the engine was bent too hight and it would keept the hood from closing, but i was able to bend it back. Now when i put the top mount on it still wont close. Im pretty sure its on correctly because all of its screws match up with the correct holes. Ill try to get pics in tomorrow.

Put the stock hood on till you can afford a front mount

[GT4WRC]

....

This post has been edited by GT4WRC: Jan 15, 2006 - 1:59 AM

[celi_gt_racer]

Nothing personal against this guy.... but i absolutely hate when this happens
A guy virtually comes out of nowhere and is like "I swapped in a 3s-gte" - yet this community has previously heard nothing about it. You would think that the average person would have at least a couple of questions concerning the swap. Also, it always comes up that they dont have a digital camera - and can't get one somehow , therefore they never have pics. I'm not trying to flame on this guy or anything - but if you can't get pics up pretty soon - someone is gonna call BS on your thread

[Blakout16]

thats awesome that he didnt have ask questions - cuz if there has ever been a concern or a question - it has been answered on here for celicatech

[celi_gt_racer]

I'm just saying it's a shame that he never posted any of his info on the swap.... or any specs in his profile.
It's just the lack of info that gets to me.... because i'm jealous of everyone w/ 3s-gte's and if they don't share in there experience - how am i gonna live vicariously through them???

[Defgeph]

I agree with you Celi GT. I try to share as much as I can about the 3sgte. being videos or photos. I was once in your position.

[Rjb23]

Mine fits fine.

[creis]

nm, I guess it does fit over in most cases.

This post has been edited by creis: Jan 16, 2006 - 1:31 AM

[Consynx]

please tell me you don't have the rain-diverter still attached to the hood you are trying to put on. . .

[lagos]

stock hoods do not clear the top mount intercooler

um, yeah they do.

[Rjb23]

The top mount will clear just fine, you just need to take the cover off of it. Mine wouldn't fit with the cover on but I took it off and it fits, but its tight.

[playr158]

if it won't close right then try instering urethane bushings (you can find them at home depot) between the hood hinge and the hood for a small amount of clearance gain

[eggman40]

I'm just saying it's a shame that he never posted any of his info on the swap.... or any specs in his profile.
It's just the lack of info that gets to me.... because i'm jealous of everyone w/ 3s-gte's and if they don't share in there experience - how am i gonna live vicariously through them???

sorry for not posting a whole lot about the swap, i have thrown it out there here and there with a few questions but the reason why i dont elaborate on it is because this is my first swap ever and im kinda learning as i go. I dont want hand out any wrong info. Once im done and it all works well i plan on posting everything i did and volunteering myself to answer any quesitons anyone may have. But until then ill keep low and make sure i get every thing going well.

[CheesyLobster]

its a known fact that the tmic of a 3sgte wont fit under the hood of a standard at200-st204 chassie. even though you have an aftermarket hood, im sure that they didnt take the 3sgte into concideration when manufacturing the hood for the at200. so your choices are a) get a gt4 hood b) take a chainsaw to the hood or try to hammer it out c) (the best option) save for a fmic.

[Rjb23]

its a known fact that the tmic of a 3sgte wont fit under the hood of a standard at200-st204 chassie. even though you have an aftermarket hood, im sure that they didnt take the 3sgte into concideration when manufacturing the hood for the at200. so your choices are a) get a gt4 hood b) take a chainsaw to the hood or try to hammer it out c) (the best option) save for a fmic.

Hmmm thats really wierd because mine fits under the vis c-one replica. Its a tight fit but it fits, it touches the hood infact but it still closes. It is a good idea to fmic asap, cus the tmic sucks balls anyway.

[96c-oneconv]

I still have the stock hood on my car and I had to make modifications to make it work. I had to cut some of the support bars so it wouldn't rub. But what can you do with CF?