 O2 Sensor, Should this be replaced? (pic) |
 Feb 13, 2006 - 4:11 PM
|
 
|
 Enthusiast  Joined Feb 27, '04 From Illinois Currently Offline Reputation: 1 (100%)  |
I had to drive an hour and half to meet beastman for the sale of my sideskirts. The night before, I filled up my car. When I came back...I was on empty. Almost dead out. It was only 180-200 miles put on the car during that trip. So today, I was thinking about the possible problems that could be contributing to my crappy gas mileage... The first thing I thought about was the O2 sensor. My car burns oil and maybe the residue was clogging up the sensor or something. I took it out, and here is what it looked like.
 This is after I took a wire brush to it and cleaned it the best I could. The white charred marks were a lot thicker. Also, towards the base of the sensor (closest to the flange) was a thick black gunky residue that came off. My question is, should this be replaced or would cleaning it help out? Or make it worse..? Thanks in advance, Steve --------------------  |
Posts in this topic
Yota O2 Sensor Feb 13, 2006 - 4:11 PM
jayi12-15psi just replace it, they're like $35 from au... Feb 13, 2006 - 5:35 PM Yota ok, i ended up cleaning it up really well. it loo... Feb 13, 2006 - 11:32 PM Blakout16 ehhh, still replace it - it might look good but ch... Feb 14, 2006 - 4:08 AM
Dr_Tweak cleaning it won't really help, it's the pa... Feb 14, 2006 - 4:18 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 21st, 2025 - 6:40 PM |