 Assist Me Please?! |
 Mar 10, 2006 - 12:26 AM
|
 
|
|
Enthusiast Joined Mar 9, '06 From Melbourne, Florida, USA Currently Offline Reputation: 0 (0%)  |
Hi!
*DISCLAIMER* I'm a bit of a nublet, I did a search, and turned up nothing. So, that being said... I recently purchased a 1995 Celica ST for 400 bucks non-running order. I quickly procured a 3S-GTE ST185 front clip for it, with the awd tranny. And grabbed a camry transmission off of a 5S-FE motor at a junkyard(As I didn't have the necessary parts/budget/skill to do the awd swap). Only problem is, the passenger side transaxle has a bracket that sits properly, but doesn't bolt up(No bolt holes). Personally, as this is a fairly low budget swap (2500 total into it, car & clip), I was thinking about just drilling the holes through the iron plate as a fix. However my friend seems to think that it would be cheaper and faster just to procure another transaxle bracket that mounts straight to the block without modification. Has anyone been in a similar prediciment, or have some expert advice on what would be best/easiet/cheapest? Thanks in advance. -Dustin. |
Posts in this topic
quantumspec1 Assist Me Please?! Mar 10, 2006 - 12:26 AM
defgeph You need 6th gen GT brackets for your engine and t... Mar 10, 2006 - 12:30 AM snapshotgt ^Defs how-to: http://www.6gc.net/forums/index.php... Mar 10, 2006 - 12:35 AM
lagos you need a bracket from a 5sfe motor.
then you r... Mar 10, 2006 - 1:05 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 13th, 2026 - 6:46 PM |