 Tranny/Clutch Issues |
 Mar 12, 2006 - 7:28 PM
|
 
|
|
Enthusiast  Joined May 23, '05 From Sauga Currently Offline Reputation: 0 (0%)  |
So I waited on my mr2 tranny, I got the alltrac shifter cables & axles, I go to install everything, and I get the tranny bolted to the block, the passenger side engine mount is in, all the wires are hooked back up. I have the intermediate shaft hooked up, and I go to install the shifter cables before I go any further, and it won't shift into 1st, 3rd, 5th, or reverse.
So what I want to know is 1. If the front & rear mount are not hooked up will it cause the tranny to be so far out of place that I can't put it into those gears. 2. My clutch pedal won't move an inch is there something I'm missing or forgetting to do what would cause my clutch pedal to not move like that. |
Posts in this topic
3sgte@daspeedof Tranny/Clutch Issues Mar 12, 2006 - 7:28 PM
Supersprynt I dont think 5th gen cables will work. Mar 12, 2006 - 7:57 PM Dr_Tweak 1. Maybe, hook up the mounts. Also, you may need t... Mar 13, 2006 - 7:38 AM ZoomZoom you might wanna try installing all the mounts,
His... Mar 13, 2006 - 8:04 AM 3sgte@daspeedof I went and got alltrac cables, so my issue is that... Mar 14, 2006 - 3:48 PM Supersprynt Oh, I assumed you had a 6gc cuz well, its 6gc.net.... Mar 14, 2006 - 3:50 PM 3sgte@daspeedof Yes I did swap all of that hardware over, from the... Mar 14, 2006 - 5:03 PM Supersprynt Have you tried moving the linkage by hand to make ... Mar 15, 2006 - 9:19 AM
3sgte@daspeedof lol, you must think I'm an idiot, I'm real... Mar 15, 2006 - 4:44 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 29th, 2025 - 6:03 PM |