how do you take this off Options

[pandakid]

im gonna perimer this part does anyone know how to take that off. pictures would be nice

[LewFX]

the bolts are behind the trunk plastic, i think theres only a few of em

This post has been edited by LewFX: Apr 8, 2006 - 4:44 PM

[pandakid]

yea i took that off i unblod 3 screws and the lisence plate and it still seem stuck in its place. i didn't want to break it so i wanna make sure im doing it right

[Fastbird]

yea i took that off i unblod 3 screws and the lisence plate and it still seem stuck in its place. i didn't want to break it so i wanna make sure im doing it right

Looking at pics of removed items, you may need to pull the tail lights to get it out. Why you taking it out?

[Batman722]

taking it off is easy and should take about 5-10 min start to finish...

1 take off rear interior black plastic panel (*optional*, but easier to see the "pegs" in step 5)
2 remove tails (3 10mm nuts - use deep socket)
3 remove reg plate
4 there are either 2 or 4 bolts on either side of the panel (outside the car, behind the tails)...2 at the top I am sure of, if there are some at the bottom I can't remember... - they are 10mm
5 pull it strait out. There are a few "peg clips" holding it in place.

at that point the best thing to do is change the plate bulbs (from the inside of the panel) usually the bolts that hold the plate light covers (outside) get rusted and suck to get out.

BTW, I have an extra silver rear panel for sale if anyone wants it...

[pandakid]

getting ready to primer it. thanks batman