7afte boost, stock internals Options

[akiyama]

how much boost can a stock 7afte handle? i need to know coz im planning on raising my boost.

[nik]

how much boost can a stock 7afte handle? i need to know coz im planning on raising my boost.

what size of turbo is it and whats the trim 8 psi on one turbo puts out more or less power than another different size or trim turbo

[akiyama]

i think its a ct9 turbo.

[nik]

i think its a ct9 turbo.

thats nice but what are the specs on the turbo

[akiyama]

im not sure with the specs. but the turbo size is small. it was a turbo kit provided by toms.

[akiyama]

regarding with the internals, how much boost can the pistons,conecting rod and bearing can handle?

[nik]

80-90whp over stock is close to the limit of the 7afte the rods are pretty thin

[doGGy]

It all depends on how accurate your Tuning is, and how acurated A/F and ignition is.. Another thing - is your engine condition...

My old 7AFTE setup ran 220 hp and 279nm of Tq. This is almost 100hp over the stock.

And all this was on stock internals stock head gasket and etc...

I think 12 psi is a limit with the stock internals in a long run, and still you have to tune up all the way to make your engine handle this.

[akiyama]

thanks guys for the info. by the way does anybody has a picture of the connecting rods and pistons of a 7afte? can you pls. post it. Im not sure if my internals are stock, since the rod looks thick and the piston has coating already.

[OOBE]

Well, the rod looks way beefier and thicker than the piston, but it's still a pretty thin rod if you compare it to the stouter ones of other engines. Anyway, I've been running 12 PSI on mine since 2003 and so far, so good. I only rebuilt it because I broke a piston...some little problem with the injectors...no biggie. I beat the hell out of it when I drive it and it takes it like a champ...just a sloppy S-AFC tune. Never dynoed, widebanded, etc. I can't wait to break it, so I can stuff it with the forged goodies and the EMS I got under my bed.

[FallenHero]

one rod is 7afe, one is form a very nice 2zzGe uber engine. you may guess which is which.

[OOBE]

i think its a ct9 turbo.

thats nice but what are the specs on the turbo

Pffft!

one rod is 7afe, one is form a very nice 2zzGe uber engine. you may guess which is which.

When I opened my 7A to replace the internals, man...I was surprised at how fragile the stock pistons were. They looked so brittle, you know. Rods look much stronger than them, even though they're puny!

[akiyama]

which one is the 7afte? is it the one on the left?
how about the pistons do you have images of the pistons. im now boosting at 10 psi.

[FallenHero]

... The newer rod with no pistons is from a performance engine. the 7afe unit is oil baked in that picture.


When My friend ws tapping the pistons out, one fell into my hands as I sat below the engine stand.... the first thing I said when it hit my hands was "it's a GIRL!"... tiny piston and rod...