6G Celicas Forums

Welcome Guest ( Log In | Register )

> Pressure Plate and Flywheel Problem, They Don't Match Up
post May 13, 2006 - 1:04 AM
+Quote Post
TRD-ST204

Enthusiast
**
Joined Sep 26, '04
From Sacramento, California
Currently Offline

Reputation: 4 (100%)




Today, I took out my Fidanza flywheel and my Exedy OEM replacement pressure plate to look at them. I wanted to see how the pressure plate would look mounted on the flywheel, so I tried to fit the studs on the flywheel through the holes on the pressure plate. I tried many times and rotated the pressure plate but the two parts just won't go together. The holes and the studs are off by just a hair, so I just wanted to know if this is a big problem and I should be worried or if it is a minor problem and it can be easily fixed. Thanks

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: July 24th, 2025 - 6:00 PM