 Pressure Plate and Flywheel Problem, They Don't Match Up |
 May 13, 2006 - 1:04 AM
|
 
|
|
Enthusiast  Joined Sep 26, '04 From Sacramento, California Currently Offline Reputation: 4 (100%)  |
Today, I took out my Fidanza flywheel and my Exedy OEM replacement pressure plate to look at them. I wanted to see how the pressure plate would look mounted on the flywheel, so I tried to fit the studs on the flywheel through the holes on the pressure plate. I tried many times and rotated the pressure plate but the two parts just won't go together. The holes and the studs are off by just a hair, so I just wanted to know if this is a big problem and I should be worried or if it is a minor problem and it can be easily fixed. Thanks
|
Posts in this topic
TRD-ST204 Pressure Plate and Flywheel Problem May 13, 2006 - 1:04 AM
presure2 QUOTE(TRD-ST204 @ May 13, 2006 - 2... May 13, 2006 - 11:22 AM
TRD-ST204 QUOTEsounds like you may have gotten the wrong par... May 15, 2006 - 6:41 PM GT4WRC If the holes aren't lined up correctly, then t... May 15, 2006 - 6:54 PM TRD-ST204 QUOTE(GT4WRC @ May 15, 2006 - 11:54 ... May 16, 2006 - 6:21 PM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 12th, 2026 - 9:17 AM |