Minnesota Meet Thread Options

[block]

true that. will, how's omega? you guys going to gb?

[bccentaur3]

true that. will, how's omega? you guys going to gb?

Great and yes. We're also playing in the 24 under tourney this weekend.

[flying-corolla]

hey does anyone have a 94-95 celica bumper? if so can you let me know how much, i've been looking and don't really want to pay shipping when i can just drive down and pick it up. let me know guys. thanks.

[block]

damn, i was selling my 94-95 bumper but now i might need to drive the celica

[block]

true that. will, how's omega? you guys going to gb?

Great and yes. We're also playing in the 24 under tourney this weekend.

kool. ill be watching!

[RUNNIN-LOW]

well guys its sad but yeah im selling the celica this time its for reals! im asking for 6k i know its alot but the car is worth more..it comes with big turbo upgrade t3/t4 2 1/2 to 3 inch down pipe with a full 3inch cat back. front mount intercooler 2 1/2 inch ic piping with a 3 1/2 inch intercooler and mr2 gen throttle body with a rfl bov. i just did a compression test and it perfect all around.. did a engine leakdown test and its holding up ooh yeah i also have cams for it too not installed yet either. the motor is a gen3 wrc it has about 35k on it right now we just installed a mr2e153 tranny (6plunk disc and stage 3 pressure plate)so you know it will handle abuse if you plan on doing it. i bought the motor with only 21k(did a full rebuild) on it and ive owned it since 05 so i really havent put tons of miles on it. most of the time the car sat around on stand cause of all the upgrades. it just gotten a color change if you look on my profile it will show, the paint job isnt perfect but it works midnight blue but it looks black lol.. the car has the 96+ front bumper with the ss3 front splitters, trd rear splitters and 404 side skirts all painted to match. i just havent install the side skirts yet. projector head lights, jdm tails and clear turns. ( have redded out tail light too)
the car has AEM wideband, prosport boost gauge and oil temp gauge, hks turbo timer and i also have a alarm for it but its not installed. suspension comes with nopi green springs 2inch drop and kyb front inserts and rears are moogs struts with nopi springs..the car handles very well but as you know the celica is kinda of front heavy(motor and tranny) so it WILL clunk when you ride over pot holes. over all the car is in very good shape now..all the rust is gone now and ive replace mostly everything on the car.. i might have forgotten some of the stuff but yeah let me know pass the word around..decided to post it up on here first then..if no one wants it ill post it on the wtb page then craigslist..

its sad but you know if i ever want to get back in the game i can always but if i do come back im going to come back with something different!

give me a call at 651-353-9246 hey no joy rides either..its a pretty monster not something to hit it and quit it.

[Nartanian]

What are you getting into now. And remember when I got the headlights? You owe me a joy ride lol.

This post has been edited by Nartanian: Aug 12, 2010 - 10:37 PM

[ZGear]

DAMN! It's been so long since I've been here.

Yeah, I've been collecting parts here and there. It's at about 75 to 80 percent complete with the parts. I gotta fix my GT caliper upgrade, both the parts car's front calipers are seized. So I'mma have to source them out or buy em from NAPA. I also need to order a Walbro 255 and small misc parts. I'm also debating on ordering a ebay bov or buying an actual decent one.

Hey John, sorry to hear about the car and good luck. When will I get my skirts back? Your buddy who needs the door, will he replace it with his old door or will he just take it? I'm off tomorrow, give me a call or text.

Seems like I'm the only one modifying a 6gc now. Well once you see me rolling, expect heads turning.

[Nartanian]

Kool. You aren't the only one though. There is a red 3rd gen 3sgte with a ct20 that runs around uni.

[ZGear]

Kool. You aren't the only one though. There is a red 3rd gen 3sgte with a ct20 that runs around uni.

Yeah, we know him. I bought my 3S from him. Tao Thao.

[block]

damn. i see that you, me, and remy are the only ones trolling around here. nartanian trolls in once in a while lol.

ger, is your car running yet?

[Nartanian]

Yea, well I can't really do much with mine, but I like to see whats up. Haven't heard from Mugs in a bit though.

[ZGear]

damn. i see that you, me, and remy are the only ones trolling around here. nartanian trolls in once in a while lol.

ger, is your car running yet?

No, I'm hoping before winter hits. If not, then I have a big plan before spring hits and it gives me more time to finish things.

[ZGear]

I'm also debating on a new radiator. Would need you guys to shine in.

So my problem now is if I want to put an investment into a Koyo radiator, keep the radiator oem, or go with a ebay brand "Godspeed". Keeping the radiator oem is not an option as I would want to drive it hard at times, say at Rockfalls. Now the options are Koyo or Ebay brand. With those two, they are aluminum and 2-row thick. I haven't researched into too much details, but they say that there are smaller size aluminum radiator out there, only matter of making it fit.

Just wondering what you guys think.

[Azncelica]

I'm also debating on a new radiator. Would need you guys to shine in.

So my problem now is if I want to put an investment into a Koyo radiator, keep the radiator oem, or go with a ebay brand "Godspeed". Keeping the radiator oem is not an option as I would want to drive it hard at times, say at Rockfalls. Now the options are Koyo or Ebay brand. With those two, they are aluminum and 2-row thick. I haven't researched into too much details, but they say that there are smaller size aluminum radiator out there, only matter of making it fit.

Just wondering what you guys think.

I'm they guy with the 3rd gen 3sgte swap, I've got the ebay brand god speed radiator, it has same size as koyo radiator, I was having over heating problem, replace radiator, took care of problem, don't waste your money on koyo, your really paying for the name, my work fine, as long as weld on radiator is good, it would not leak. If you want keep oem look, you have to clock the turbo or good smaller pipes, I'd put slim radiator fan in my. I went with the pusher fan, instead of the puller, which is oem. meaning fan are in front of radiator, Create more engine bay room and look cleaner. So if you are interest in looking into my set up, Let my know you can come and see my car. Tao

[Azncelica]

hey does anyone have a 94-95 celica bumper? if so can you let me know how much, i've been looking and don't really want to pay shipping when i can just drive down and pick it up. let me know guys. thanks.

How much are you looking to pay for one, I have to check, I still got one, clean one, off a donor car I picked up ago, was keeping it for spare, but taking my space. Let me know if your interest. Tao

This post has been edited by Azncelica: Aug 24, 2010 - 7:32 PM

[bccentaur3]

Tao you such a loser man. hahaha

[Azncelica]

Tao you such a loser man. hahaha

I was hoping I got your attention, I've been reading all these post, I figure it time to put my 2 cents in. By the way WIll, I guess my might be playing football against you soon.

Tao you such a loser man. hahaha

I was hoping I got your attention, I've been reading all these post, I figure it time to put my 2 cents in. By the way WIll, I guess my might be playing football against you soon.

[bccentaur3]

you're going to GB labor day tourney?

[Azncelica]

you're going to GB labor day tourney?

No, going hunting, but possible other tourney in future.