Sep 24, 2006 - 5:14 PM
|
|
|
Enthusiast ![]() ![]() Joined Jun 30, '05 From Chattanooga, TN Currently Offline Reputation: 5 (100%) |
the other day someone hit my door and i removed the skin to pop the dents out... needless to say im lazy and didnt get the skin back on before it rained. my window and sunroof were open and a few things got wet. i went to roll up my passenger window and it wouldnt work.
motor is still good - i rolled it up off the cig lighter circuit. cant get either passenger switch to work checked all the fuses i could think of - none blown. driver side window works fine. so my guess... switch is bad - seriously doubt this some fuse i cant find is bad there is some relay i dont know about that is bad or some wire burnt itself out already took the switch apart and it looks fine. hoping its a fuse or relay im missing any ideas would be welcome - my next step is to test some voltage read outs, but am in need of a pinout for the passenger window switch plug.. has 5 wires on it. |
Stu37363 need help narrowing electrical problem Sep 24, 2006 - 5:14 PM
Bitter are there any other things that dont work? Sep 25, 2006 - 12:24 PM
WannabeGT4 Sounds like your window lock switch is pressed. Sep 25, 2006 - 12:32 PM
Stu37363 no, thats the only thing that doesnt work... i did... Sep 25, 2006 - 1:56 PM
Stu37363 QUOTE(Stu37363 @ Sep 25, 2006 - 2:56... Oct 2, 2006 - 11:51 AM
MaskedMan Which door panel did you remove. And did your win... Oct 2, 2006 - 12:17 PM
Stu37363 QUOTE(MaskedMan @ Oct 2, 2006 - 1:17... Oct 6, 2006 - 4:47 PM
WannabeGT4 http://www.celicatech.com/vfewdsou/1995/95...ic/po... Oct 2, 2006 - 1:12 PM
Stu37363 well i used those power window bgb pages and got s... Oct 8, 2006 - 6:26 PM![]() ![]() |
| Lo-Fi Version | Time is now: December 16th, 2025 - 2:50 PM |