Dec 22, 2006 - 9:48 PM
|
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
EDIT: I started this thread X-mas break 06-07 while attending the Naval Academy Preparatory School. Now I am about to leave for the Coast Guard Academy and will be going through an officer indoctrination. therefore no 6gc until September and no driving the celi until 2010ish..... anywho i'm going to keep updating this thread when possibly i am home for a holiday and work on the car etc.!! wish me luck.
(original) So i'm home for Christmas break and its time to work on my car. The swap is sooo close to being complete and i'm hoping to transfer my plates over soon so she is on the road. Right now she is sitting on the lift at my friends garage and i have been working on her everyday. [b]December 21st: -Replaced an axle seal -welded the stock exhaust to match up with the 3sgte -fixed some issues with the door lock -got the power steering running -removed the rear wiper and antenna -installed the kirkasaurus polyurethane inserts December 22nd: -welded the holes where the wiper and antenna were -bondo'ed the holes as well as some other body work areas -painted the hub on a front rotor -and painted the caliper red -painted my gt-four riser blocks -debadged (still glue on there though... For the rest of the break i plan on: -finishing the body work -installing riser blocks and spoiler DONE! -installing 6.5 front components DONE! -making custom clear turns -installing all of the interior panels that are currently out... DONE! -installing three DCW gauge pods (triple, single and shift boot) DONE! -installing 6 prosport gagues (oil pres, fuel pres, boost/vacuum,water temp, exhaust temp, volt)DONE -Moving battery to boot DONE! -installing alpine head unit DONE! -put my rims on there DONE! -Install custom intake pipe DONE! -MAKE HOOD CLOSE DONE! -and soooooo much more i can't remember off the top of my head! here are some progress pics: ![]() ^ On my friends lift ![]() ![]() ![]() ^ The daily driver waiting patiently outside ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ^ Some stuff waiting to go in! ART intake XS Down Pipe Magnaflow 3in spun cat, muffler, resonator DCW pod (triple) Subs And down the bottom there are some intercooler pipes from Jgreenings old set-up (Spearco is on its way!!!!) (and in the back is my Gibson This post has been edited by jcbass7: Dec 20, 2008 - 12:37 PM |
jcbass7 Car Progress Thread (3sgte) Dec 22, 2006 - 9:48 PM
jcbass7 and one more before i leave,
before:
now: Jun 30, 2007 - 6:02 PM
eggman40 Looks really good so far! How does the car fe... Jul 6, 2007 - 1:17 AM
jcbass7 Ok.. so like I've said before.. I am away at s... Sep 28, 2007 - 9:54 AM
x_itchy_b_x Mmm low mileage lol. yeah that car has come a long... Sep 28, 2007 - 9:56 AM
Valo666 QUOTE(jcbass7 @ Sep 28, 2007 - 9:54 ... Sep 28, 2007 - 10:49 AM
jcbass7 I found a seller on ebay that had some rare JDM ga... Sep 28, 2007 - 11:49 AM
Valo666 nice....i dont even wanna know how much it cost th... Sep 28, 2007 - 11:52 AM
jcbass7 QUOTE(Valo666 @ Sep 28, 2007 - 12:52... Sep 28, 2007 - 12:04 PM
purplegt4 QUOTE(jcbass7 @ Sep 28, 2007 - 1:04 ... Sep 28, 2007 - 12:56 PM
trdwasiq mad props:) Sep 29, 2007 - 9:36 PM
toyocelgt95 is there a web site that sells those gauge pods? Sep 29, 2007 - 10:39 PM
jcbass7 QUOTE(toyocelgt95 @ Sep 29, 2007 - 11... Sep 30, 2007 - 11:23 AM
3SGTE Hey jcbass, where bouts did you pick up the car sk... Sep 30, 2007 - 4:02 PM
jcbass7 QUOTE(3SGTE @ Sep 30, 2007 - 5:02 PM... Oct 5, 2007 - 8:28 AM
TomPoz Be aware that TRD speedo is not perfect - mine is ... Oct 1, 2007 - 4:04 PM
lubu QUOTE(TomPoz @ Oct 2, 2007 - 5:04 AM... Oct 1, 2007 - 4:26 PM
TomPoz QUOTE(lubu @ Oct 1, 2007 - 4:26 PM) ... Oct 2, 2007 - 2:06 PM
jcbass7 So i am home for the weekend.. first time in 5 mon... Oct 7, 2007 - 12:57 PM
Valo666 you gonna re-spray and clean up the bay when shes ... Oct 7, 2007 - 1:01 PM
jcbass7 and she is out!
bad pic.. it was dark Oct 7, 2007 - 6:51 PM
Valo666 that was quick..lol Oct 7, 2007 - 10:37 PM
goferris so why did you take it out?
if you don't want ... Oct 7, 2007 - 11:15 PM
Batman722 nice job Jesse
next time you have a weekend off ... Oct 7, 2007 - 11:17 PM
jcbass7 QUOTE(goferris @ Oct 8, 2007 - 12:15... Oct 8, 2007 - 7:50 AM
x_itchy_b_x haha nice. what goodies do you have in store for i... Oct 8, 2007 - 7:58 AM
jcbass7 QUOTE(x_itchy_b_x @ Oct 8, 2007 - 8... Oct 9, 2007 - 12:40 PM
dtlwrc Nice work my man! Keep us update! Oct 9, 2007 - 4:09 PM
jcbass7 minor update..
found a gt-four cluster
so now... Oct 10, 2007 - 4:48 PM
Valo666 nice jesse..another ebay find?? Oct 10, 2007 - 5:12 PM
jcbass7 QUOTE(Valo666 @ Oct 10, 2007 - 6:12 ... Oct 11, 2007 - 8:15 AM
frosty as a joke, scribble off the km/h and put mph Oct 11, 2007 - 10:06 AM
jcbass7 ok so not really an update.. well yea but not much... Dec 2, 2007 - 8:23 PM
celicast3sgte just curious whatcha sellin? Dec 2, 2007 - 8:53 PM
Batman722 long time no see Jesse ! you doing ok at the a... Dec 2, 2007 - 9:11 PM
jcbass7 QUOTE(Batman722 @ Dec 2, 2007 - 9:11... Dec 3, 2007 - 9:50 AM
snapshotgt Right on Jesse. Dec 2, 2007 - 10:50 PM
presure2 good job jesse!
one of your cams is off a toot... Dec 4, 2007 - 7:13 AM
jcbass7 Manny here is a better shot. Think whoever fiddle... Dec 4, 2007 - 8:28 PM
presure2 QUOTE(jcbass7 @ Dec 4, 2007 - 9:28 P... Dec 5, 2007 - 6:38 AM
laff09 QUOTE(presure2 @ Dec 5, 2007 - 6:38 ... Dec 8, 2007 - 5:24 PM
Rusty wow (just read 13 pages of work) nice
anyway, yo... Dec 9, 2007 - 1:45 AM
jcbass7 QUOTE(Rusty @ Dec 9, 2007 - 1:45 AM)... Dec 9, 2007 - 11:35 AM
jcbass7 just got home again for xmas break.. back until ja... Dec 20, 2007 - 12:21 PM
bccentaur3 QUOTE(jcbass7 @ Dec 20, 2007 - 11:21... Dec 20, 2007 - 11:35 PM
snapshotgt Start diggin' Jesse! Dec 20, 2007 - 8:02 PM
Rusty ..doesn't look that much Dec 20, 2007 - 11:12 PM
CelicaSTX02 Holy Crap!!! I just started reading th... Dec 21, 2007 - 1:07 PM
jcbass7 QUOTE(CelicaSTX02 @ Dec 21, 2007 - 1... Dec 23, 2007 - 4:19 PM
Stogbob QUOTE(CelicaSTX02 @ Dec 21, 2007 - 1... Dec 23, 2007 - 6:57 PM
jcbass7 Update December 27th
-shoveled my way to the celi... Dec 27, 2007 - 7:54 PM
Rusty love the silver trim around the gauges, sets it of... Dec 27, 2007 - 10:33 PM
jcbass7 QUOTE(Rusty @ Dec 27, 2007 - 10:33 P... Dec 28, 2007 - 7:30 AM
Rusty I can't wait! -so the guessing begins...
n... Dec 28, 2007 - 6:36 PM
jcbass7 QUOTE(Rusty @ Dec 28, 2007 - 6:36 PM... Dec 29, 2007 - 9:06 AM
presure2 looks like your making good progress jesse!
wh... Dec 29, 2007 - 9:07 AM
jcbass7 QUOTE(presure2 @ Dec 29, 2007 - 9:07... Dec 29, 2007 - 12:03 PM
presure2 QUOTE(jcbass7 @ Dec 29, 2007 - 12:03... Dec 29, 2007 - 1:10 PM
jcbass7 gotchya, yea part numbers would be awesome thank... Dec 29, 2007 - 1:25 PM
presure2 1628388381 this is the water pump to oil cooler ho... Dec 29, 2007 - 1:31 PM
jcbass7 December 29th 2007
Removed more parts from the en... Dec 29, 2007 - 6:53 PM
presure2 damnit jesse, i keep waiting for a shot of the gea... Dec 29, 2007 - 7:23 PM
jcbass7 QUOTE(presure2 @ Dec 29, 2007 - 7:23... Dec 30, 2007 - 8:01 AM
presure2 QUOTE(jcbass7 @ Dec 30, 2007 - 8:01 ... Dec 30, 2007 - 8:18 AM
Rusty hmm some HKS adjustable cam gears would look nice:... Dec 29, 2007 - 11:16 PM
jcbass7 edit: gonna need some bigger vice grips Dec 30, 2007 - 8:51 AM
jcbass7 update.. nothing on the engine, but some with the ... Jan 3, 2008 - 12:24 PM
Valo666 oh hellz yes..lol. Is you do saude it will look si... Jan 3, 2008 - 12:38 PM
jcbass7 QUOTE(Valo666 @ Jan 3, 2008 - 12:38 ... Jan 3, 2008 - 12:48 PM
jcbass7 for the humor or all.. here is my interior at the ... Jan 3, 2008 - 4:27 PM
Batman722 jesse, I have a spare dash if you want it Jan 3, 2008 - 4:31 PM
jcbass7 QUOTE(Batman722 @ Jan 3, 2008 - 4:31... Jan 3, 2008 - 4:34 PM
goferris i'm jealous that you have these. is that the o... Jan 4, 2008 - 12:05 AM
massbrandon ^^ I think Doggy made more than one but Jesse is t... Jan 4, 2008 - 7:32 AM
jcbass7 well i was home for about 12 hours... and did a li... Mar 17, 2008 - 7:39 PM
x_itchy_b_x who stole your wheels! least they left it on b... Mar 17, 2008 - 8:13 PM
jcbass7 QUOTE(x_itchy_b_x @ Mar 17, 2008 - 9... Mar 18, 2008 - 1:03 PM
6GenCelicaST QUOTE
PICS:
i don't really think bricks w... Mar 17, 2008 - 8:22 PM
Rusty take the battery out?
good idea of the cover, may... Mar 18, 2008 - 1:29 AM
jcbass7 This is my least favorite page of my progress thre... Mar 18, 2008 - 12:53 PM
jcbass7 Ok so i'm bored and am going to reply to my ow... Mar 18, 2008 - 1:28 PM
Valo666 if you get a 3rd gen 3s, can i take the OEM 3rd ge... Mar 18, 2008 - 10:41 PM
jcbass7 QUOTE(Valo666 @ Mar 18, 2008 - 11:41... Mar 19, 2008 - 7:06 AM
jcbass7 UPDATE: I'm still alive and the car is as well... Dec 20, 2008 - 10:49 AM
RickJamesBish Wow, that sucks. Not worried about the weather kil... Dec 20, 2008 - 5:50 PM
presure2 good to hear your still kickin jesse!! Dec 20, 2008 - 6:23 PM
hurley97 Oh a Jesse sighting!!! You are alive... Dec 20, 2008 - 7:19 PM
jcbass7 QUOTE (presure2 @ Dec 20, 2008 - 6:2... Dec 21, 2008 - 11:48 AM
EKAn Great thread
Any updates on this? Jan 3, 2010 - 10:57 PM
jcbass7 QUOTE (EKAn @ Jan 3, 2010 - 10:57 PM... Jan 4, 2010 - 7:59 AM
Success21 QUOTE (jcbass7 @ Jan 4, 2010 - 8:59 ... Jan 9, 2010 - 1:00 AM
EKAn i've always wonder if that would work, It soun... Jan 5, 2010 - 11:48 AM![]() ![]() |
| Lo-Fi Version | Time is now: January 15th, 2026 - 3:51 AM |