 Problem with backlit gauge., Gives no reading with lights turned on.. |
 Jul 20, 2003 - 3:03 PM
|
 
|
 Enthusiast  Joined Oct 16, '02 From Hohenwald, Tennessee Currently Offline Reputation: 1 (100%)  |
I've got the Auto Meter Cobalt series air/fuel gauge installed in my car. The problem I'm having is that when I turn my lights on with the gauge's illumination wire connected, the LEDs on the gauge turn off and won't give a reading. I've got the red wire (12V) connected to the cig. lighter power, the ground wire is connected to the ground wire on the cig. lighter, the illumination is connected to the cig. lighter light wire, and of course the sensor wire is connected to the O2 sensor. The gauge works fine as long as the illumination isn't hooked up, or if I have my lights off.
Anyone know what the dilly is with this gauge? 
|
Posts in this topic
Delta_Phoenix Problem with backlit gauge. Jul 20, 2003 - 3:03 PM
AudioFreak Try connecting the illumination to the 12v directl... Jul 21, 2003 - 1:20 AM  |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: July 16th, 2025 - 11:40 AM |