FS: TRD QUICKSHIFTER, SOLD, PLEASE LOCK Options

[Negative]

I'll just do the paypal. $2 OK? IDK
Anyway - I read the how to and [as I figured] I didn't learn anything I didn't already know but it is nice to have a step by step and it's well written/thought out too.
It very clearly warns though that you must have 4 spacers that were supposed to be supplied with the kit. You do have these don't you?

$hit I just noticed the box says '94-'99. Now I very seriously doubt there are any differences in the '98-'99 but does anybody know anything I don't?

[pittfirefighter]

I'll just do the paypal. $2 OK? IDK
Anyway - I read the how to and [as I figured] I didn't learn anything I didn't already know but it is nice to have a step by step and it's well written/thought out too.
It very clearly warns though that you must have 4 spacers that were supposed to be supplied with the kit. You do have these don't you?

$hit I just noticed the box says '94-'99. Now I very seriously doubt there are any differences in the '98-'99 but does anybody know anything I don't?

this line was produced in 97, it fits the 98 and 99 though too, same model number, i do not have the four spacers, the four stock ones are plastic and can be used for this but notice a little bit of wobble, the metal ones just give it a stiffer feel, i thought you already had a TRD shifter so you should have the spacers, they are the same ones, we still good to go? let me know cause i have someone else interested too

[97lestyousay]

They are aluminum, if you have access to a machine shop here are some
dims. The center is a thru hole for obvious reasons. lol

[Negative]

Thanks 97lestyousay.
Pittfighter - Yeah we are good to go. I have full access to a machine shop and in the case that I don't already have the spacers I can make them. My TRD QS was dealership installed at the time of purchase by the first owner so IDK if they are there but it doesn't matter.
I'll paypal you today. What's your info and how do I do it? I've only ever used paypal through ebay so IDK. I'll get it done today though.

BTW - those dimensions are in metric right? Or are the dimensions in the top print supposed t be .383 and .200? I'm an engineer and I'm confused LOL. I'm fixing to have them made in my shop right now.

This post has been edited by Negative: Mar 8, 2007 - 9:32 AM

[NickJames]

part# PTR042094004 is the BRAND new, just modified...the one AFTER the one that is discontinued, shortens the throw by 25% or more, I got mine on the way...CAN'T WAIT!!

[Negative]

What are you saying?

Pittfirefighter - can you answer my above questions? I will get you $ ASAP.

[pittfirefighter]

What are you saying?

Pittfirefighter - can you answer my above questions? I will get you $ ASAP.

PM'ed

And this is the most current TRD quickshifter you can buy, which is DISCONTINUED since it is now 2007 and production ended in 1999. If you think you found a newer one... it's either...
A) not TRD
B) the same one i'm selling
still don't believe me? check TRD's website yourself, i just did

This post has been edited by pittfirefighter: Mar 8, 2007 - 2:26 PM

[Negative]

I trust you and I'm not worried about it. Plus I'm the one buying it so what's it matter?

[pittfirefighter]

I trust you and I'm not worried about it. Plus I'm the one buying it so what's it matter?

sorry my comment wasn't directed towards you... its towards nick james who decided to jump my post again...

[NickJames]

your part number is a quickshifter...I never said you were full of it...so why you get all offensive...I don't know...my part number is a quickshifter kit, with TRD knob, and yes it is TRD, I ordered it from a dealership. And what the DEALERSHIP told ME was that this is a brand new updated version, just shipped from japan...there is only like 5 in the country...so if there is any confusion, I wasn't jumping anything, just trying to help people out thats all

PS....what trd website do you go to...I can't find one that will let me search parts online

This post has been edited by NickJames: Mar 8, 2007 - 4:36 PM

[97lestyousay]

BTW - those dimensions are in metric right? Or are the dimensions in the top print supposed t be .383 and .200? I'm an engineer and I'm confused LOL. I'm fixing to have them made in my shop right now.

Yeah, in inches .200 and .383, the points didn't show up. The very top of the .588 boss
has about a .05 45 deg chamfer on it, not shown. I don't think it's nessicary just helps
with lead in.

[Negative]

No prob. Spacers should be done today. Thanks so much.
Pittfirefighter - I'll be paying at 11:00 Central time this morning. I had to transfer funds from Savings to Checking since we are not doing paypal. Don't worry man I always keep my word.

[Negative]

You have PM's and e-mail. I will be without internet from 5PM CST to 8AM CST monday and I know you need/want the money ASAP so get back with me and we will get it together.

[Negative]

Check your e-mail aain.

BTW - Here is a production drawing I did for the spacer if anyone needs it. It is much easier for a machinist to read than the ones above. This is what I am providing to my machinists to get it made [might just make them myself for the fun of it - been a while since I did any lathe work - gotta keep the skills sharp]. Also If anyone else needs these spacers - let me know and I can add it to the production work order I'm fixing to give my shop. My boss is so cool. I've helped him mod his boat before and he's a boat junky so he undersands the need to mod. I've done countless strut tower braces in our shop here. I gaurantee mine are the most effective on the market.



This post has been edited by Negative: Mar 9, 2007 - 3:09 PM

[Negative]

Paid! Check your paypal.
My shipping address:

Premier Lubrication Systems, Inc.
14105 Packard St
Houston Texas 77040
Attn: Matt Syler

Please be sure to include the attention to part so I will get it.
Thanks and don't forget to give me a reply on my reputation.

I'll be back on-line on Monday 8AM CST

[97lestyousay]

nvm

This post has been edited by 97lestyousay: Mar 9, 2007 - 10:25 PM

[NickJames]

its seems like you guys awork in machine shops...I do too!! lol...wow, its kind of a small world!, I was just wondering how much experience any of you have in the business

[Negative]

I used to now I design parts as our Engineering Manager. Movin on up...

Pittfirefighter - Did you get my payment?

nvm

Was something wrong with the drawing?